- Student Records
Programme & Unit Catalogues


ME30045: Aerospace structures 1

Follow this link for further information on academic years Academic Year: 2012/3
Follow this link for further information on owning departmentsOwning Department/School: Department of Mechanical Engineering
Follow this link for further information on credits Credits: 6
Follow this link for further information on unit levels Level: Honours (FHEQ level 6)
Follow this link for further information on period slots Period: Semester 1
Follow this link for further information on unit assessment Assessment: CW 25%, EX 75%
Follow this link for further information on supplementary assessment Supplementary Assessment: ME30045 Re-Assessment Examination (where allowed by programme regulations)
Follow this link for further information on unit rules Requisites:
Follow this link for further information on unit content Description: Aims:
To introduce appropriate techniques for the loading, stress analysis and failure prediction of aircraft structures.

Learning Outcomes:
After taking this unit the student should be able to:
* Determine critical gust and manoeuvre load cases for an aircraft.
* Construct shear force, bending moment and torque diagrams.
* Design aircraft structures by accounting for static strength, buckling and fatigue failure.

Skills:
Problem solving; numeracy; working independently; written communication.

Content:
Influence of speed, altitude, geometry, weight and stiffness on aircraft loads. Gust and manoeuvre envelope. Shear force, bending moment and torque diagrams. Shear flow and shear centre of open and close sections. Fracture strength and crack propagation, including safe-life and damage-tolerant design. Shear buckling and tension fields - analysis and design of ribs and spars. Compression buckling of stiffened panels - analysis and design of wing panels. Introduction to structural optimisation.
Follow this link for further information on programme availabilityProgramme availability:

ME30045 is Compulsory on the following programmes:

Department of Mechanical Engineering
  • UEME-AFB26 : BEng (hons) Aerospace Engineering (Full-time) - Year 3
  • UEME-AKB26 : BEng (hons) Aerospace Engineering (Full-time with Thick Sandwich Placement) - Year 4
  • UEME-AFM04 : MEng (hons) Aerospace Engineering (Full-time) - Year 3
  • UEME-AKM04 : MEng (hons) Aerospace Engineering (Full-time with Thick Sandwich Placement) - Year 4
  • UEME-AFM05 : MEng (hons) Aerospace Engineering with French (Full-time) - Year 3
  • UEME-AKM05 : MEng (hons) Aerospace Engineering with French (Full-time with Thick Sandwich Placement) - Year 4
  • UEME-AFM06 : MEng (hons) Aerospace Engineering with German (Full-time) - Year 3
  • UEME-AKM06 : MEng (hons) Aerospace Engineering with German (Full-time with Thick Sandwich Placement) - Year 4

ME30045 is Optional on the following programmes:

Department of Mechanical Engineering
  • UEME-AFM01 : MEng (hons) Automotive Engineering (Full-time) - Year 4
  • UEME-AKM01 : MEng (hons) Automotive Engineering (Full-time with Thick Sandwich Placement) - Year 5
  • UEME-AFM02 : MEng (hons) Automotive Engineering with French (Full-time) - Year 4
  • UEME-AKM02 : MEng (hons) Automotive Engineering with French (Full-time with Thick Sandwich Placement) - Year 5
  • UEME-AFM03 : MEng (hons) Automotive Engineering with German (Full-time) - Year 4
  • UEME-AKM03 : MEng (hons) Automotive Engineering with German (Full-time with Thick Sandwich Placement) - Year 5
  • UEME-AFM16 : MEng (hons) Mechanical Engineering (Full-time) - Year 4
  • UEME-AKM16 : MEng (hons) Mechanical Engineering (Full-time with Thick Sandwich Placement) - Year 5
  • UEME-AFM41 : MEng (hons) Mechanical Engineering with Advanced Design and Innovation (Full-time) - Year 4
  • UEME-AKM41 : MEng (hons) Mechanical Engineering with Advanced Design and Innovation (Full-time with Thick Sandwich Placement) - Year 5
  • UEME-AFM42 : MEng (hons) Mechanical Engineering with Advanced Design, Innovation and French (Full-time) - Year 4
  • UEME-AKM42 : MEng (hons) Mechanical Engineering with Advanced Design, Innovation and French (Full-time with Thick Sandwich Placement) - Year 5
  • UEME-AFM43 : MEng (hons) Mechanical Engineering with Advanced Design, Innovation and German (Full-time) - Year 4
  • UEME-AKM43 : MEng (hons) Mechanical Engineering with Advanced Design, Innovation and German (Full-time with Thick Sandwich Placement) - Year 5
  • UEME-AFM17 : MEng (hons) Mechanical Engineering with French (Full-time) - Year 4
  • UEME-AKM17 : MEng (hons) Mechanical Engineering with French (Full-time with Thick Sandwich Placement) - Year 5
  • UEME-AFM18 : MEng (hons) Mechanical Engineering with German (Full-time) - Year 4
  • UEME-AKM18 : MEng (hons) Mechanical Engineering with German (Full-time with Thick Sandwich Placement) - Year 5
  • UEME-AFM38 : MEng (hons) Mechanical Engineering with Manufacturing and Management (Full-time) - Year 4
  • UEME-AKM38 : MEng (hons) Mechanical Engineering with Manufacturing and Management (Full-time with Thick Sandwich Placement) - Year 5
  • UEME-AFM39 : MEng (hons) Mechanical Engineering with Manufacturing, Management and French (Full-time) - Year 4
  • UEME-AKM39 : MEng (hons) Mechanical Engineering with Manufacturing, Management and French (Full-time with Thick Sandwich Placement) - Year 5
  • UEME-AFM40 : MEng (hons) Mechanical Engineering with Manufacturing, Management and German (Full-time) - Year 4
  • UEME-AKM40 : MEng (hons) Mechanical Engineering with Manufacturing, Management and German (Full-time with Thick Sandwich Placement) - Year 5

Notes:
* This unit catalogue is applicable for the 2012/13 academic year only. Students continuing their studies into 2013/14 and beyond should not assume that this unit will be available in future years in the format displayed here for 2012/13.
* Programmes and units are subject to change at any time, in accordance with normal University procedures.
* Availability of units will be subject to constraints such as staff availability, minimum and maximum group sizes, and timetabling factors as well as a student's ability to meet any pre-requisite rules.