- Student Records
Programme & Unit Catalogues


CE20095: Separations processes 2

Follow this link for further information on academic years Academic Year: 2013/4
Further information on owning departmentsOwning Department/School: Department of Chemical Engineering
Further information on credits Credits: 6
Further information on unit levels Level: Intermediate (FHEQ level 5)
Further information on teaching periods Period: Semester 2
Further information on unit assessment Assessment: EX 100%
Further information on supplementary assessment Supplementary Assessment: Like-for-like reassessment (where allowed by programme regulations)
Further information on requisites Requisites:
Further information on descriptions Description: Aims:
To develop key concepts in separation processes and mass transfer of relevance to the chemical engineering profession.

Learning Outcomes:
After successfully completing this unit students should be able to:
* Understand steady and unsteady state models for mass transfer across a phase boundary;
* Design a mass transfer controlled packed column;
* Design a batch distillation column operating under constant top product composition conditions;
* Examine reflux and stage requirements for multi-component distillation columns;
* Carry out a detailed design of a separating column.

Skills:
Analysis, design and problem solving.

Content:
* Mass transfer across a phase boundary, including the 2 film theory, penetration theory, Higbie, and Higbie-Danckwerts models;
* Mass transfer coefficients and their use in dimensionless groups and correlations to describe mass transfer;
* The role of mass transfer coefficients in the design of absorption columns;
* Concept of Number of Transfer Units and Height of a Transfer Unit;
* Batch distillation operation with constant top product composition;
* Estimation of the reflux and stage requirements for multi-component distillation processes using the correlations of Gilliland and Erbar-Maddox;
* Detailed distillation column design;
* Operation of multiple-effect evaporators.
Further information on programme availabilityProgramme availability:

CE20095 is Compulsory on the following programmes:

Department of Chemical Engineering
  • UECE-AFB05 : BEng (hons) Chemical Engineering (Full-time) - Year 2
  • UECE-AKB05 : BEng (hons) Chemical Engineering (Full-time with Thick Sandwich Placement) - Year 2
  • UECE-AFM01 : MEng (hons) Biochemical Engineering (Full-time) - Year 2
  • UECE-AKM01 : MEng (hons) Biochemical Engineering (Full-time with Thick Sandwich Placement) - Year 2
  • UECE-AFM05 : MEng (hons) Chemical Engineering (Full-time) - Year 2
  • UECE-AKM05 : MEng (hons) Chemical Engineering (Full-time with Thick Sandwich Placement) - Year 2

Notes:
* This unit catalogue is applicable for the 2013/4 academic year only. Students continuing their studies into 2014/15 and beyond should not assume that this unit will be available in future years in the format displayed here for 2013/14.
* Programmes and units are subject to change at any time, in accordance with normal University procedures.
* Availability of units will be subject to constraints such as staff availability, minimum and maximum group sizes, and timetabling factors as well as a student's ability to meet any pre-requisite rules.