Department of Mechanical Engineering

Professor Chris Bowen

Chris Bowen

Contact details

Room: 4E 2.11
Tel: +44 (0) 1225 383660
Email: c.r.bowen@bath.ac.uk

PhD supervision

Interested in supervising students studying;

  • Ceramic materials
  • Piezoelectric materials
  • Smart Materials and Structures
  • Sensors
  • Actuators.

BSc DPhil

Profile

Chris Bowen is a Professor in Materials Science and Engineering in the Department of Mechanical Engineering at the University of Bath.

Professor Bowen's research areas include functional materials such as ferroelectrics and piezoelectric composites. This research is aimed at development of:

  • Sensor and actuator materials
  • Multifunctional ceramics and composites
  • Structural and functional ceramics
  • Nanoporous and nanostructured materials
  • Dielectric properties of materials
  • Embedded actuators and sensors.

Teaching units

  • Metals and Alloys
  • Materials Selection in Engineering Design
  • Design, Materials and Manufacture II.

Publications

Book/s

Topolov, V. Y., Bisegna, P. and Bowen, C. R., 2014. Piezo-active composites:orientation effects and anisotropy factors. Springer. (Springer Series in Materials Science; 185)

Topolov, V. Y. and Bowen, C., 2009. Electromechanical Properties in Composites Based on Ferroelectrics. Springer. (Engineering Materials and Processes; 48)

Book Sections

Nuño, M., Ball, R. and Bowen, C., 2016. Photocatalytic Properties of Commercially Available TiO2 Powders for Pollution Control. In: Nanotechnology and Nanomaterials "Semiconductor Photocatalysis - Materials, Mechanisms and Applications". , p. 613.

Topolov, V. Y., Bowen, C. R. and Bisegna, P., 2016. New effects in 1–3-type composites based on relaxor-ferroelectrics single crystals. In: PArinov, I. A., Chang, S.-H. and Topolov, V. Y., eds. Advanced Materials. Springer Science and Business Media, LLC, pp. 179-195. (Springer Proceedings in Physics; 175)

Betts, D. N., Bowen, C. R., Inman, D. J., Weaver, P. M. and Kim, H. A., 2014. Investigation of geometries of bistable piezoelectric-laminate plates for vibration-based energy harvesting. In: Liao, W.-H., ed. Proceedings of SPIE - The International Society for Optical Engineering.Vol. 9057. .

Edwards, M. J., Vittoz, S., Amen, R., Rufer, L., Johander, P., Bowen, C. R. and Allsopp, D. W. E., 2010. Modelling and optimisation of a sapphire/GaN-based diaphragm structure for pressure sensing in harsh environments. In: Conference Proceedings - The 18th International Conference on Advanced Semiconductor Devices and Microsystems, ASDAM 2010. Piscataway, NJ: IEEE Computer Society, pp. 127-130.

Topolov, V.Y., Bowen, C.R. and Glushanin, S.V., 2010. High performance of advanced composites based on relaxor-ferroelectric single crystals. In: Piezoceramic Materials and Devices. Nova Science, pp. 71-112.

Lewis, R. W. C., Merrick, A. J., Dent, A. C. E. and Bowen, C. R., 2010. The influence of mechanical stress on piezoceramic tubes. In: 2010 IEEE International Symposium on the Applications of Ferroelectrics. New York: IEEE.

Kloss, S., Lewis, R. W. C., Dent, A., Weston, N., Jonas, K., Bowen, C. R., Hand, D. P. and Shephard, J. D., 2009. Electrode ablation on piezoelectric ceramics by NS-pulsed laser ablation for sensor applications. In: ICALEO 2009 - 28th International Congress on Applications of Lasers and Electro-Optics, Congress Proceedings.Vol. 102. Orlando: Laser Institute of America, pp. 1194-1203.

Hao, S., Taylor, J., Miles, A. and Bowen, C., 2009. An implantable electronic system for in-vivo stability evaluation of prosthesis in Total Hip and Knee Arthroplasty. In: I2MTC: 2009 IEEE Instrumentation & Measurement Technology Conference. New York: IEEE, pp. 171-176. (IEEE Instrumentation and Measurement Technology Conference)

Bowen, C. R., Topolov, V. Y. and Dent, A. C. E., 2009. Electromechanical properties of hydroxyapatite / BaTiO3 composites. In: ICCM-17 - 17th International Conference on Composite Materials. Vancover: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)

Topolov, V. Y., Bowen, C. R., Bisegna, P. and Krivoruchko, A. V., 2009. Performance of novel piezo-active- composites based on relaxor-ferroelectric single crystals. In: ICCM-17 - 17th International Conference on Composite Materials. Vancover: International Committee on Composite Materials. (ICCM International Conferences on Composite Materials)

Bowen, C. R., Raman, K. V. S. and Topolov, Y. Y., 2008. Piezoelectric composites based on hydroxyapatite/barium titanate. In: CIMTEC 2008 - Proceedings of the 3rd International Conference on Smart Materials, Structures and Systems - Smart Materials and Micro/Nanosystems.Vol. 54. Trans Tech Publications Ltd, pp. 1-6.

Gittings, J. P., Bowen, C. R., Turner, I. G., Baxter, F. R. and Chaudhuri, J. B., 2008. Polarisation behaviour of calcium phosphate based ceramics. In: Marques, A. T., Silva, A. F., Baptista, A. P. M., Sá, C., Alves, F. J. L., Malheiros, L. F. and Vieira, M., eds. Advanced Materials Forum IV: Materiais 2007. Zurich: Trans Tech Publications, pp. 91-95.

Ramesh, R., Kara, H., Stevens, R. and Bowen, C., 2008. Progress in porous piezoceramics. In: Rosslere, D., ed. Developments in Ceramic Materials Research. Nova Publishers, pp. 211-240.

Articles

Casado, C., Timmers, R., Sergejevs, A., Clarke, C. T., Allsopp, D. W. E., Bowen, C. R., van Grieken, R. and Marugán, J., 2017. Forthcoming. Design and validation of a LED-based high intensity photocatalytic reactor for quantifying activity measurements. Chemical Engineering Journal, 327, pp. 1043-1055.

Wang, Q., Zhang, X., Bowen, C. R., Li, M.-Y., Ma, J., Qiu, S., Liu, H. and Jiang, S., 2017. Effect of Zr/Ti ratio on microstructure and electrical properties of pyroelectric ceramics for energy harvesting applications. Journal of Alloys and Compounds, 710, pp. 869-874.

Polak-Krasna, K., Fuhrhop, C., Rochat, S., Burrows, A., Georgiadis, A., Bowen, C. and Mays, T., 2017. AFM imaging and nanoindentation of polymer of intrinsic microporosity PIM-1. International Journal of Hydrogen Energy

Luo, H., Roscow, J., Zhou, X., Chen, S., Han, X., Zhou, K., Zhang, D. and Bowen, C. R., 2017. Ultra-high discharged energy density capacitor using high aspect ratio Na0.5Bi0.5TiO3 nanofibers. Journal of Materials Chemistry A, 5 (15), pp. 7091-7102.

Roscow, J., Lewis, R., Taylor, J. and Bowen, C., 2017. Modelling and fabrication of porous sandwich layer barium titanate with improved piezoelectric energy harvesting figures of merit. Acta Materialia, 128, pp. 207-217.

Bowen, C. R., Dent, A. C., Stevens, R., Cain, M. G. and Avent, A., 2017. A new method to determine the un-poled elastic properties of ferroelectric materials. Science and Technology of Advanced Materials

Pappas, G. S., Wan, C., Bowen, C., Haddleton, D. M. and Huang, X., 2017. Functionalization of BaTiO3 nanoparticles with electron insulating and conducting organophosphazene-based hybrid materials. RSC Advances, 7 (32), pp. 19674-19683.

Polak-Krasna, K., Dawson, R., Holyfield, L. T., Bowen, C. R., Burrows, A. D. and Mays, T. J., 2017. Mechanical characterisation of polymer of intrinsic microporosity PIM-1 for hydrogen storage applications. Journal of Materials Science, 52 (7), 3862–3875.

Zhang, D., Zhou, X., Roscow, J., Zhou, K., Wang, L., Luo, H. and Bowen, C. R., 2017. Significantly enhanced energy storage density by modulating the aspect ratio of BaTiO3 nanofibers. Scientific Reports, 7, 45179.

Jiang, Q., Allsopp, D. W.E. and Bowen, C. R., 2017. Growth of GaN epitaxial films on polycrystalline diamond by metal-organic vapor phase epitaxy. Journal of Physics D: Applied Physics, 50 (16), 165103.

Zabek, D., Seunarine, K., Spacie, C. and Bowen, C., 2017. Graphene ink laminate structures on poly(vinylidene difluoride) (PVDF) for pyroelectric thermal energy harvesting and waste heat recovery. ACS Applied Materials and Interfaces, 9 (10), pp. 9161-9167.

Aouaichia, M., McCullen, N., Bowen, C., Almond, D., Budd, C. and Bouamrane, R., 2017. Understanding the anomalous frequency responses of composite materials using very large random resistor-capacitor networks. European Physical Journal B, 90 (3), 39.

Zhang, Y., Xie, M., Roscow, J., Bao, Y., Zhou, K., Zhang, D. and Bowen, C. R., 2017. Enhanced pyroelectric and piezoelectric properties of PZT with aligned porosity for energy harvesting applications. Journal of Materials Chemistry A, 5 (14), pp. 6569-6580.

Xie, M., Dunn, S., Le Boulbar, E. and Bowen, C. R., 2017. Pyroelectric energy harvesting for water splitting. International Journal of Hydrogen Energy

Wan, C. and Bowen, C. R., 2017. Multiscale-structuring of polyvinylidene fluoride for energy harvesting:the impact of molecular-, micro- and macro-structure. Journal of Materials Chemistry A, 5 (7), pp. 3091-3128.

Chen, C., Zhang, Y., Zeng, J., Zhang, F., Zhou, K., Bowen, C. and Zhang, D., 2017. Aligned macroporous TiO2/chitosan/reduced graphene oxide (rGO) composites for photocatalytic applications. Applied Surface Science

Chandrasekaran, S., Kim, E. J., Chung, J. S., Yoo, I. K., Senthilkumar, V., Kim, Y. S., Bowen, C. R., Adamaki, V. and Hyun Hur, S., 2017. Structurally tuned lead magnesium titanate perovskite as a photoelectrode material for enhanced photoelectrochemical water splitting. Chemical Engineering Journal, 309, pp. 682-690.

Wang, W., Cao, J., Bowen, C. R., Zhou, S. and Lin, J., 2017. Optimum resistance analysis and experimental verification of nonlinear piezoelectric energy harvesting from human motions. Energy, 118, pp. 221-230.

Harris, P., Arafa, M., Litak, G., Bowen, C. R. and Iwaniec, J., 2017. Output response identification in a multistable system for piezoelectric energy harvesting. European Physical Journal B, 90 (1), 20.

Stefanski, F., Minorowicz, B., Persson, J., Plummer, A. and Bowen, C., 2017. Non-linear control of a hydraulic piezo-valve using a generalised Prandtl-Ishlinskii hysteresis model. Mechanical Systems and Signal Processing, 82.

Tong, J., Bowen, C. and Plummer, A., 2017. Mechanical properties of titanium-based Ti–6Al–4V alloys manufactured by powder bed additive manufacture. Materials Science and Technology, 33 (2), pp. 138-148.

Subohi, O., Bowen, C. R., Malik, M. M. and Kurchania, R., 2016. Dielectric spectroscopy and ferroelectric properties of magnesium modified bismuth titanate ceramics. Journal of Alloys and Compounds, 688 (Part B), pp. 27-36.

Tamboli, V. K., Bhalla, N., Jolly, P., Bowen, C. R., Taylor, J. T., Bowen, J. L., Allender, C. J. and Estrela, P., 2016. Hybrid synthetic receptors on MOSFET devices for detection of prostate specific antigen in human plasma. Analytical Chemistry, 88 (23), pp. 11486-11490.

Formisano, N., Bhalla, N., Heeran, M., Reyes Martinez, J., Sarkar, A., Laabei, M., Jolly, P., Bowen, C. R., Taylor, J. T., Flitsch, S. and Estrela, P., 2016. Inexpensive and fast pathogenic bacteria screening using field-effect transistors. Biosensors and Bioelectronics, 85, pp. 103-109.

Kumar, A., Sharma, A., Kumar, R., Vaish, R. and Bowen, C. R., 2016. Performance of K0.5Na0.5NbO3-LiSbO3-CaTiO3 ceramics in acoustic energy harvesting exposed to sound pressure. Ferroelectrics, 504 (1), pp. 149-159.

Xie, M., Zabek, D., Bowen, C., Abdelmageed, M. and Arafa, M., 2016. Wind-driven pyroelectric energy harvesting device. Smart Materials and Structures, 25 (12), 125023.

Alomari, A., Batra, A., Aggarwal, M. and Bowen, C. R., 2016. A multisource energy harvesting utilizing highly efficient ferroelectric PMN-PT single crystal. Journal of Materials Science-Materials in Electronics, 27 (10), pp. 10020-10030.

Zabek, D., Taylor, J. and Bowen, C. R., 2016. Characterization and modelling of meshed electrodes on free standing polyvilylidene difluoride (PVDF) films for enhanced pyroelectric energy harvesting. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 63 (10), pp. 1681-1689.

Chandrasekaran, S., Kim, E. J., Chung, J. S., Bowen, C. R., Rajagopalan, B., Adamaki, V., Misra, R. D. K. and Hur, S. H., 2016. High performance bifunctional electrocatalytic activity of a reduced graphene oxide-molybdenum oxide hybrid catalyst. Journal of Materials Chemistry A, 4 (34), pp. 13271-13279.

Roscow, J. I., Taylor, J. and Bowen, C. R., 2016. Manufacture and characterization of porous ferroelectrics for piezoelectric energy harvesting applications. Ferroelectrics, 498 (1), pp. 40-46.

Rastogi, M., Bowen, C., Kushwaha, H. S. and Vaish, R., 2016. First principles insights into improved catalytic performance of BaTiO3- graphene nanocomposites in conjugation with experimental investigations. Materials Science in Semiconductor Processing, 51, pp. 33-41.

Luo, H., Zhou, K., Bowen, C., Zhang, F., Wei, A., Wu, Z., Chen, C. and Zhang, D., 2016. Building hierarchical interfaces using BaSrTiO3 nanocuboid dotted graphene sheets in an optimized percolative nanocomposite with outstanding dielectric properties. Advanced Materials Interfaces, 3 (15), 1600157.

Syta, A., Bowen, C. R., Kim, H. A., Rysak, A. and Litak, G., 2016. Responses of bistable piezoelectric-composite energy harvester by means of recurrences. Mechanical Systems and Signal Processing, 76-77, pp. 823-832.

Taylor, J., Bowen, C. and Zabek, D. A., 2016. A novel pyroelectric generator utilising naturally driven temperature fluctuations from oscillating heat pipes for waste heat recovery and thermal energy harvesting. Journal of Applied Physics, 120 (2), 024505.

Vats, G., Kumar, A., Ortega, N., Bowen, C. R. and Katiyar, R. S., 2016. Pyroelectric control of magnetization for tuning thermomagnetic energy conversion and magnetocaloric effect. Energy & Environmental Science, 9 (7), pp. 2383-2391.

Adamaki, V., Minster, T., Thomas, T., Fourlaris, G. and Bowen, C. R., 2016. Study of the mechanical properties of Ti2AlC after thermal shock. Materials Science and Engineering A, 667, pp. 9-15.

Bowen, C., Ting, V., Sui, T. and Korsunsky, A. M., 2016. Editorial - Virtual special issue on materials for energy efficient transport. Materials & Design, 97, p. 444.

Talakokula, V., Bhalla, S., Ball, R. J., Bowen, C. R., Pesce, G. L., Kurchania, R., Bhattacharjee, B., Gupta, A. and Paine, K., 2016. Diagnosis of carbonation induced corrosion initiation and progression in reinforced concrete structures using piezo-impedance transducers. Sensors and Actuators A-Physical, 242, pp. 79-91.

Le Boulbar, E., Hosseini-Vajargah, S., Edwards, P. R., Coulon, P.-M., Girgel, I., Griffiths, I., Cherns, D., Martin, R. W., Humphreys, C., Bowen, C., Allsopp, D. and Shields, P., 2016. Structural and optical emission uniformity of m-plane InGaN single quantum wells in core-shell nanorods. Crystal Growth and Design, 16 (4), pp. 1907-1916.

Harris, P., Bowen, C. R., Kim, H. A. and Litak, G., 2016. Dynamics of a vibrational energy harvester with a bistable beam:voltage response identification by multiscale entropy and “0-1” test. European Physical Journal Plus, 131 (4), 109.

Vats, G., Kumar, A., Ortega, N., Bowen, C. R. and Katiyar, R. S., 2016. Giant pyroelectric energy harvesting and a negative electrocaloric effect in multilayered nanostructures. Energy & Environmental Science, 9 (4), pp. 1335-1345.

Le Boulbar, E., Lewins, C., Allsopp, D., Bowen, C. and Shields, P., 2016. Fabrication of high-aspect ratio GaN nanostructures for advanced photonic devices. Microelectronic Engineering, 153 (5), pp. 132-136.

Thomas, T. and Bowen, C. R., 2016. Effect of particle size on the formation of Ti2AlC using combustion synthesis. Ceramics International, 42 (3), pp. 4150-4157.

Duro, J. A., Padget, J. A., Bowen, C. R., Kim, H. A. and Nassehi, A., 2016. Multi-sensor data fusion framework for CNC machining monitoring. Journal of Mechanical Systems and Signal Processing, 66-67, pp. 505-520.

Topolov, V. Y., Bowen, C. R. and Ermakov, I. A., 2016. Remarkable hydrostatic piezoelectric response of novel 2–0–2 composites. Ferroelectrics, Letters Section, 43 (4-6), pp. 90-95.

Roscow, J., Topolov, V. Y., Bowen, C., Taylor, J. and Panich, A. E., 2016. Understanding the peculiarities of the piezoelectric effect in macro-porous BaTiO3. Science and Technology of Advanced Materials, 17 (1), pp. 769-776.

Chauhan, A., Patel, S., Vaish, R. and Bowen, C. R., 2015. Anti-ferroelectric ceramics for high energy density capacitors. Materials, 8 (12), pp. 8009-8031.

Avent, A. W. and Bowen, C. R., 2015. Principles of thermoacoustic energy harvesting. European Physical Journal - Special Topics, 224 (14-15), pp. 2967-2992.

Bowen, C. and Thomas, T., 2015. Macro-porous Ti2AlC MAX-phase ceramics by the foam replication method. Ceramics International, 41 (9 Part B), pp. 12178-12185.

Roscow, J., Zhang, Y., Taylor, J. and Bowen, C. R., 2015. Porous ferroelectrics for energy harvesting applications. European Physical Journal - Special Topics, 224 (14-15), pp. 2949-2966.

Topolov, V. Y., Bowen, C. R., Bisegna, P. and Panich, A. E., 2015. Effect of the matrix subsystem on hydrostatic parameters of a novel 1-3-type piezo-composite. Functional Materials Letters, 8 (5), 1550049.

Patel, S., Vaish, R., Chauhan, V. S. and Bowen, C., 2015. Microstructural finite element modeling and simulation on Al-MgO composites. International Journal of Computational Methods, 12 (5), 1550030.

Nuño, M., Pesce, G. L., Bowen, C. R., Xenophontos, P. and Ball, R. J., 2015. Environmental performance of nano-structured Ca(OH)2/TiO2 photocatalytic coatings for buildings. Building and Environment, 92, pp. 734-742.

Zhang, Y., Bao, Y., Zhang, D. and Bowen, C. R., 2015. Porous PZT ceramics with aligned pore channels for energy harvesting applications. Journal of the American Ceramic Society, 98 (10), pp. 2980-2983.

Syta, A., Bowen, C. R., Kim, H. A., Rysak, A. and Litak, G., 2015. Experimental analysis of the dynamical response of energy harvesting devices based on bistable laminated plates. Meccanica, 50 (8), pp. 1961-1970.

Avent, A. W. and Bowen, C. R., 2015. Thermoacoustic energy harvesting. Proceedings of Meetings on Acoustics, 23 (1), 030004.

Wales, D. J., Grand, J., Ting, V. P., Burke, R. D., Edler, K. J., Bowen, C. R., Mintova, S. and Burrows, A. D., 2015. Gas sensing using porous materials for automotive applications. Chemical Society Reviews, 44 (13), pp. 4290-4321.

Bowen, C. R., Taylor, J., Leboulbar, E., Zabek, D., Chauhan, A. and Vaish, R., 2015. Correction:Pyroelectric materials and devices for energy harvesting applications. Energy & Environmental Science, 8 (7), p. 2129.

Nuño, M., Ball, R. J., Bowen, C. R., Kurchania, R. and Sharma, G. D., 2015. Photocatalytic activity of electrophoretically deposited (EPD) TiO2 coatings. Journal of Materials Science, 50 (14), pp. 4822-4835.

Topolov, V. Y., Bowen, C. R. and Bisegna, P., 2015. New aspect-ratio effect in three-component composites for piezoelectric sensor, hydrophone and energy-harvesting applications. Sensors and Actuators A-Physical, 229, pp. 94-103.

Almond, D. P. and Bowen, C. R., 2015. An explanation of the photoinduced giant dielectric constant of lead halide perovskite solar cells. Journal of Physical Chemistry Letters, 6 (9), pp. 1736-1740.

Zabek, D., Taylor, J., Le Boulbar, E. and Bowen, C. R., 2015. Micropatterning of flexible and free standing polyvinylidene difluoride (PVDF) films for enhanced pyroelectric energy transformation. Advanced Energy Materials, 5 (8).

Bowen, C. R. and Arafa, M. H., 2015. Energy harvesting technologies for tire pressure monitoring systems. Advanced Energy Materials, 5 (7).

Topolov, V. Y. and Bowen, C. R., 2015. High-performance 1-3-type lead-free piezo-composites with auxetic polyethylene matrices. Materials Letters, 142, pp. 265-268.

Topolov, V. Y., Bowen, C. R., Bisegna, P. and Krivoruchko, A. V., 2015. New orientation effect in piezo-active 1-3-type composites. Materials Chemistry and Physics, 151, pp. 187-195.

Bowen, C., Taylor, J., Le Boulbar, E., Zabek, D. A. and Topolov, V.Y., 2015. A modified figure of merit for pyroelectric energy harvesting. Materials Letters, 138, pp. 243-246.

Vats, G., Vaish, R. and Bowen, C. R., 2015. Selection of ferroelectric ceramics for transducers and electrical energy storage devices. International Journal of Applied Ceramic Technology, 12 (S1), E1-E7.

Harris, P., Skinner, W., Bowen, C. R. and Kim, H. A., 2015. Manufacture and characterisation of piezoelectric broadband energy harvesters based on asymmetric bistable cantilever laminates. Ferroelectrics, 480 (1), pp. 65-76.

Song, Y.-Z., Bowen, C. R., Kim, H. A., Nassehi, A., Padget, J., Gathercole, N. and Dent, A., 2014. Non-invasive damage detection in beams using marker extraction and wavelets. Mechanical Systems and Signal Processing, 49 (1-2), pp. 13-23.

Bowen, C. R., Taylor, J., Leboulbar, E., Zabek, D., Chauhan, A. and Vaish, R., 2014. Pyroelectric materials and devices for energy harvesting applications. Energy & Environmental Science, 7 (12), pp. 3836-3856.

Zhang, J., Wang, C. and Bowen, C., 2014. Piezoelectric effects and electromechanical theories at the nanoscale. Nanoscale, 6 (22), pp. 13314-13327.

Adamaki, V., Clemens, F., Taylor, J., Mays, T. J. and Bowen, C. R., 2014. Re-oxidation mechanism and kinetics of fine scale Ti-Magnéli phases in fibre form using thermo-gravimetric analysis. Journal of Materials Science, 49 (21), pp. 7597-7603.

Borowiec, M., Rysak, A., Betts, D. N., Bowen, C. R., Kim, H. A. and Litak, G., 2014. Complex response of a bistable laminated plate:Multiscale entropy analysis. European Physical Journal Plus, 129 (211), pp. 1-7.

Nuño, M., Ball, R. J. and Bowen, C. R., 2014. Study of solid/gas phase photocatalytic reactions by electron ionization mass spectrometry. Journal of Mass Spectrometry, 49 (8), pp. 716-726.

Bowen, C.R., Watson, M., Betts, D.N., Harris, P., Bertin, M. and Kim, H.A., 2014. Piezoelectric fibres integrated into structural composites. Ferroelectrics, 466 (1), pp. 14-20.

Bowen, C.R. and Topolov, V.Y., 2014. Polarisation orientation effects and hydrostatic parameters in novel 2-2 composites basedon PMN-x PT single crystals. Ferroelectrics, 466 (1), pp. 21-28.

Adamaki, V., Clemens, F., Ragulis, P., Pennock, S.R., Taylor, J. and Bowen, C.R., 2014. Manufacturing and characterization of Magnéli phase conductive fibres. Journal of Materials Chemistry A, 2 (22), pp. 8328-8333.

Patel, S., Vaish, R., Sinha, N. and Bowen, C. R., 2014. Finite element analysis of the microstructure of AlN-TiN composites. Strain, 50 (3), pp. 250-261.

Pesce, G. L., Bowen, C. R., Rocha, J., Sardo, M., Allen, G. C., Walker, P. J., Denuault, G., Serrapede, M. and Ball, R., 2014. Monitoring hydration in lime-metakaolin composites using electrochemical impedance spectroscopy and nuclear magnetic resonance spectroscopy. Clay Minerals, 49 (3), pp. 341-358.

Bowen, C. R., Buschhorn, S. and Adamaki, V., 2014. Manufacture and characterization of conductor-insulator composites based on carbon nanotubes and thermally reduced graphene oxide. Pure and Applied Chemistry, 86 (5), pp. 765-774.

Song, Y.-Z., Bowen, C. R., Kim, A. H., Nassehi, A., Padget, J. and Gathercole, N., 2014. Virtual visual sensors and their application in structural health monitoring. Structural Health Monitoring - An International Journal, 13 (3), pp. 251-264.

Cartmell, S. H., Thurstan, S., Gittings, J. P., Griffiths, S., Bowen, C. R. and Turner, I. G., 2014. Polarization of porous hydroxyapatite scaffolds:influence on osteoblast cell proliferation and extracellular matrix production. Journal of Biomedical Materials Research - Part A, 102 (4), pp. 1047-1052.

Bowen, C. R., Betts, D. N., Kim, H. A. and Yu. Topolov, V., 2014. 2–2 composites based on [011]-poled relaxor-ferroelectric single crystals:Analysis of the piezoelectric anisotropy and squared figures of merit for energy harvesting applications. Microsystem Technologies, 20 (4-5), pp. 709-717.

Vats, G., Vaish, R. and Bowen, C. R., 2014. An analysis of lead-free (Bi0.5Na0.5)0.915-(Bi0.5K0.5)0.05Ba0.02Sr0.015TiO3 ceramic for efficient refrigeration and thermal energy harvesting. Journal of Applied Physics, 115 (1).

Bowen, C. R., Kim, H. A., Weaver, P. M. and Dunn, S., 2014. Piezoelectric and ferroelectric materials and structures for energy harvesting applications. Energy & Environmental Science, 7 (1), pp. 25-44.

Bowen, C. R., Kim, H. A. and Salo, A. I. T., 2014. Active composites based on bistable laminates. Procedia Engineering, 75, pp. 140-144.

Bowen, C.R., 2014. Preface to Mechanical Structures and Smart materials:Selected, peer reviewed papers from the 2013 International Conference on Mechanical Structures and Smart Materials (ICMSSM 2013) November 16 - 17, 2013 Xiamen, China. Applied Mechanics and Materials, 487: Mechanical Stru, 1 - 2.

Regonini, D., Bowen, C. R., Jaroenworaluck, A. and Stevens, R., 2013. A review of growth mechanism, structure and crystallinity of anodized TiO2 nanotubes. Materials Science & Engineering R - Reports, 74 (12), pp. 377-406.

Hu, T., Wang, Z., Gursul, I. and Bowen, C., 2013. Active control of self-induced roll oscillations of a wing using synthetic jet. International Journal of Flow Control, 5 (3-4), pp. 201-214.

Betts, D., Bowen, C.R., Kim, H.A., Gathercole, N., Clarke, C.T. and Inman, D.J., 2013. Nonlinear dynamics of a bistable piezoelectric-composite energy harvester for broadband application. European Physical Journal - Special Topics, 222 (7), pp. 1553-1562.

Jiang, Q., Allsopp, D. W. E., Bowen, C. R. and Wang, W. N., 2013. The management of stress in MOCVD-grown InGaN/GaN LED multilayer structures on Si(1 1 1) substrates. Semiconductor Science and Technology, 28 (9), 094010.

Jiang, Q., Lewins, C. J., Allsopp, D. W. E., Bowen, C. R. and Wang, W. N., 2013. Investigation of strain-relaxation characteristics of nitrides grown on Si(110) by metalorganic chemical vapor deposition using X-ray diffraction. Japanese Journal of Applied Physics, 52 (8 PART2), 08JB24.

Ting, V. and Bowen, C., 2013. MEETing the transport materials challenges. Materials World, 21 (8).

Brampton, C.J., Betts, D.N., Bowen, C.R. and Kim, H.A., 2013. Sensitivity of bistable laminates to uncertainties in material properties, geometry and environmental conditions. Composite Structures, 102, pp. 276-286.

Benzeval, I., Bowen, C. R., Guy, R. H. and Delgado-Charro, M. B., 2013. Effects of iontophoresis, hydration, and permeation enhancers on human nail plate: Infrared and impedance spectroscopy assessment. Pharmaceutical Research, 30 (6), pp. 1652-1662.

Jiang, Q., Lewins, C.J., Allsopp, D.W.E., Bowen, C.R., Wang, W.N., Satka, A., Priesol, J. and Uherek, F., 2013. Enhanced photoluminescence from InGaN/GaN quantum wells on a GaN/Si(111) template with extended three-dimensional GaN growth on low-temperature AIN interlayer. Japanese Journal of Applied Physics, 52 (6), 061002.

Le Boulbar, E.D., Edwards, M.J., Vittoz, S., Vanko, G., Brinkfeldt, K., Rufer, L., Johander, P., Lalinský, T., Bowen, C.R. and Allsopp, D.W.E., 2013. Effect of bias conditions on pressure sensors based on AlGaN/GaN High Electron Mobility Transistor. Sensors and Actuators A-Physical, 194, pp. 247-251.

Panzera, T. H., Christoforo, A. L., Campos Rubio, J. C., Bowen, C. R., Borges, P. H. R. and Silva, L. J., 2013. Evaluation of compacted cementitious composites for porous bearings. International Journal of Applied Ceramic Technology, 10 (3), pp. 474-483.

Betts, D.N., Bowen, C.R., Kim, H.A., Gathercole, N., Clarke, C.T. and Inman, D.J., 2013. Investigation of bistable piezo-composite plates for broadband energy harvesting. Proceedings of SPIE, 8688, 86881N.

Sangiah, D., Plummer, A. R., Bowen, C. and Guerrier, P., 2013. A novel piezohydraulic aerospace servovalve. Part I:Design and modelling. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227 (4), pp. 371-389.

Regonini, D., Adamaki, V., Bowen, C.R., Dent, A.C.E., Pennock, S.R. and Taylor, J., 2012. AC electrical properties of TiO2 and Magnéli phases, TinO2n−1. Solid State Ionics, 229, pp. 38-44.

Cota, F. D. P., Panzera, T. H., Schiavon, M. A., Christoforo, A. L., Borges, P. H. R., Bowen, C. and Scarpa, F., 2012. Full factorial design analysis of carbon nanotube polymer-cement composites. Materials Research, 15 (4), pp. 573-580.

Bowen, C. R., Betts, D. N., Giddings, P. F., Salo, A. I. T. and Kim, H. A., 2012. A study of bistable laminates of generic lay-up for adaptive structures. Strain, 48 (3), pp. 235-240.

Hubbard, G., Nasir, M. E., Shields, P., Bowen, C. R., Satka, A., Parsons, K. P., Holmes, N. H. and Allsopp, D. W. E., 2012. Angle dependent optical properties of polymer films with a biomimetic anti-reflecting surface replicated from cylindrical and tapered nanoporous alumina. Nanotechnology, 23 (15), 155302.

Betts, D. N., Kim, H. A., Bowen, C. R. and Inman, D. J., 2012. Optimal configurations of bistable piezo-composites for energy harvesting. Applied Physics Letters, 100 (11), 114104.

Jiang, Q., Edwards, M. J., Shields, P. A., Allsopp, D. W. E., Bowen, C. R., Wang, W. N., Tóth, L., Pécz, B., Srnanek, R., Satka, A. and Kovac, J., 2012. Growth of crack-free GaN epitaxial thin films on composite Si(111)/polycrystalline diamond substrates by MOVPE. Physica Status Solidi (C) Current Topics in Solid State Physics, 9 (3-4), pp. 650-653.

Edwards, M. J., Le Boulbar, E. D., Vittoz, S., Vanko, G., Brinkfeldt, K., Rufer, L., Johander, P., Lalinský, T., Bowen, C. R. and Allsopp, D. W. E., 2012. Pressure and temperature dependence of GaN/AlGaN high electron mobility transistor based sensors on a sapphire membrane. Physica Status Solidi (C) Current Topics in Solid State Physics, 9 (3-4), pp. 960-963.

Webster, R. A., Xia, F., Pan, M., Mu, S., Dale, S. E. C., Tsang, S. C., Hammett, F. W., Bowen, C. R. and Marken, F., 2012. Voltammetric probing of pH at carbon nanofiber-Nafion-carbon nanofiber membrane electrode assemblies. Electrochimica Acta, 62, pp. 97-102.

Bowen, C., 2012. Making a mark. Materials World, 20 (2), pp. 20-21.

Graham, A. H. D., Surguy, S. M., Langlois, P., Bowen, C. R., Taylor, J. and Robbins, J., 2012. Modification of standard CMOS technology for cell-based biosensors. Biosensors and Bioelectronics, 31 (1), pp. 458-462.

Topolov, V. Y., Bowen, C. R. and Filippov, S. E., 2012. High performance of novel 1–3-type composites based on ferroelectric PZT-type ceramics. Ferroelectrics, 430 (1), pp. 92-97.

Hicks, M.-l., Tabeart, J., Edwards, M. J., Le Boulbar, E. D., Allsopp, D. W. E., Bowen, C. R. and Dent, A. C. E., 2012. High temperature measurement of elastic moduli of (0001) gallium nitride. Integrated Ferroelectrics, 133 (1), pp. 17-24.

Lewis, R. W. C., Allsopp, D. W. E., Shields, P., Šatka, A., Yu, S., Topolov, V. Y. and Bowen, C. R., 2012. Nano-Imprinting of Highly Ordered Nano-Pillars of Lithium Niobate (LiNbO3). Ferroelectrics, 429 (1), pp. 62-68.

Lewis, R. W. C., Bowen, C. R., Topolov, V. Y. and Allsopp, D. W. E., 2012. Role of Single-Crystal Pillars in Forming the Effective Properties and Figures of Merit of Novel 1–3 Piezocomposites. Integrated Ferroelectrics, 133 (1), pp. 103-108.

Topolov, V.Y., Krivoruchko, A.V. and Bowen, C.R., 2012. Anisotropy of electromechanical properties and hydrostatic response of advanced 2-2-type composites. Physica Status Solidi A: Applications and Materials Science, 209 (7), pp. 1334-1342.

Ball, R., Pesce, G. and Bowen, C., 2012. Characterisation of lime/metakaolin paste using impedance spectroscopy. Key Engineering Materials, 517, pp. 487-494.

Regonini, D., Satka, A., Jaroenworaluck, A., Allsopp, D. W. E., Bowen, C. R. and Stevens, R., 2012. Factors influencing surface morphology of anodized TiO 2 nanotubes. Electrochimica Acta, 74, pp. 244-253.

Topolov, V. Y., Bowen, C. R., Filippov, S. E. and Vorontsov, A. A., 2012. Novel high-sensitivity composites based on ferroelectric ceramics. Integrated Ferroelectrics, 133 (1), pp. 91-95.

Betts, D.N., Kim, H.A., Bowen, C.R. and Inman, D.J., 2012. Optimization of piezoelectric bistable composite plates for broadband vibrational energy harvesting. Proceedings of SPIE - The International Society for Optical Engineering, 8341, 83412Q.

Betts, D. N., Kim, H. A. and Bowen, C. R., 2012. Preliminary study of optimum piezoelectric cross-ply composites for energy harvesting. Smart Materials Research, 2012, 621364.

Regonini, D., Dent, A. C. E., Bowen, C. R., Pennock, S. R. and Taylor, J., 2011. Impedance spectroscopy analysis of TinO2n-1 Magnéli phases. Materials Letters, 65 (23-24), pp. 3590-3592.

Betts, D. N., Kim, H. A. and Bowen, C. R., 2011. Modeling and optimization of bistable composite laminates for piezoelectric actuation. Journal of Intelligent Material Systems and Structures, 22 (18), pp. 2181-2191.

Graham, A. H. D., Bowen, C. R., Surguy, S. M., Robbins, J. and Taylor, J., 2011. New prototype assembly methods for biosensor integrated circuits. Medical Engineering & Physics, 33 (8), pp. 973-979.

Bowen, C. R., Giddings, P., Salo, A. and Kim, H. A., 2011. Modeling and characterization of piezoelectrically actuated bistable composites. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 58 (9), pp. 1737-1750.

Lewis, R. W. C., Dent, A. C. E., Stevens, R. and Bowen, C. R., 2011. Microstructural modelling of the polarization and properties of porous ferroelectrics. Smart Materials and Structures, 20 (8), 085002.

Clemens, F., Comyn, T., Heiber, J., Nobre, F., Dent, A. C. E. and Bowen, C. R., 2011. Processing and electromechanical properties of lanthanum-doped Pb(Zr,Ti)O3 extruded piezoelectric fibres. Journal of Materials Science, 46 (13), pp. 4517-4523.

Giddings, P. F., Kim, H. A., Salo, A. I. T. and Bowen, C. R., 2011. Modelling of piezoelectrically actuated bistable composites. Materials Letters, 65 (9), pp. 1261-1263.

Topolov, V. Y. and Bowen, C. R., 2011. Inconsistencies of the complete sets of electromechanical constants of relaxor-ferroelectric single crystals. Journal of Applied Physics, 109 (9), 094107.

Graham, A. H. D., Robbins, J., Bowen, C. R. and Taylor, J., 2011. Commercialisation of CMOS integrated circuit technology in multi-electrode arrays for neuroscience and cell-based biosensors. Sensors, 11 (5), pp. 4943-4971.

Branson, D. T., Wang, F. C., Johnston, D. N., Tilley, D. G., Bowen, C. R. and Keogh, P. S., 2011. Piezoelectrically actuated hydraulic valve design for high bandwidth and flow performance. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 225 (3), pp. 345-359.

Topolov, V. Y., Bisegna, P. and Bowen, C. R., 2011. Analysis of the piezoelectric performance of modern 0-3-type composites based on relaxor-ferroelectric single crystals. Ferroelectrics, 413 (1), pp. 176-191.

Topolov, V. Y., Bowen, C. R. and Bisegna, P., 2011. Electromechanical coupling factors of novel 0-3-0 composites based on PMN-xPT single crystals. Ferroelectrics, 422 (1), pp. 40-43.

Song, Y.-Z., Bowen, C., Kim, H. A., Nassehi, A., Padget, J., Gathercore, N. and Dent, A., 2011. Non-invasive damage detection in composite beams using marker extraction and wavelets. Proceedings of SPIE - The International Society for Optical Engineering, 7983, 79830R.

Gerard, M., Bowen, C. R. and Osman, F. H., 2011. Processing and properties of PTFE-FEP-PTFE ferroelectret films. Ferroelectrics, 422 (1), pp. 59-64.

Branson, D., Johnston, D. N., Tilley, D., Bowen, C. and Keogh, P., 2010. Piezoelectric Actuation in a High Bandwidth Valve. Ferroelectrics, 408 (1), pp. 32-40.

Edwards, M. J., Bowen, C. R., Allsopp, D. W. E. and Dent, A. C. E., 2010. Modelling wafer bow in silicon-polycrystalline CVD diamond substrates for GaN-based devices. Journal of Physics D: Applied Physics, 43 (38), 385502.

Giddings, P., Bowen, C., Salo, A., Kim, H. A. and Ive, A., 2010. Bistable composite laminates: effects of laminate composition on cured-shape and response to thermal load. Composite Structures, 92 (9), pp. 2220-2225.

Panzera, T. H., Borges, P. H. R., Rubio, J. C., Bowen, C. R., Strecker, K. and Sabariz, A. L. R., 2010. The dielectric response of compacted cementitious composites. Advances in Cement Research, 22 (3), pp. 127-134.

Kim, H. A., Betts, D., Salo, A. I. T. and Bowen, C., 2010. Shape memory alloy-piezoelectric active structures for reversible actuation of bistable composites. AIAA Journal, 48 (6), pp. 1265-1268.

Graham, A. H. D., Bowen, C. R., Robbins, J., Lalev, G., Marken, F. and Taylor, J., 2010. Nanostructured electrodes for biocompatible CMOS integrated circuits. Sensors and Actuators B-Chemical, 147 (2), pp. 697-706.

Kumar, D., Gittings, J. P., Turner, I. G., Bowen, C. R., Bastida-Hidalgo, A. and Cartmell, S. H., 2010. Polarization of hydroxyapatite:Influence on osteoblast cell proliferation. Acta Biomaterialia, 6 (4), pp. 1549-1554.

Betts, D., Salo, A. I. T., Bowen, C. and Kim, H. A., 2010. Characterisation and modelling of the cured shapes of arbitrary layup bistable composite laminates. Composite Structures, 92 (7), pp. 1694-1700.

Regonini, D., Jaroenworaluck, A., Stevens, R. and Bowen, C. R., 2010. Effect of heat treatment on the properties and structure of TiO2 nanotubes: phase composition and chemical composition. Surface and Interface Analysis, 42 (3), pp. 139-144.

Nasir, M. E., Allsopp, D. W. E., Bowen, C. R., Hubbard, G. and Parsons, K. P., 2010. The fabrication of mono-domain highly ordered nanoporous alumina on a wafer scale by a guided electric field. Nanotechnology, 21 (10), 105303.

Jaroenworaluck, A., Regonini, D., Bowen, C. R. and Stevens, R., 2010. A microscopy study of the effect of heat treatment on the structure and properties of anodised TiO2 nanotubes. Applied Surface Science, 256 (9), pp. 2672-2679.

Hao, S. Y., Taylor, J. T., Bowen, C. R., Gheduzzi, S. and Miles, A. W., 2010. Sensing methodology for in vivo stability evaluation of total hip and knee arthroplasty. Sensors and Actuators A-Physical, 157 (1), pp. 150-160.

Baxter, F. R., Bowen, C. R., Turner, I. G. and Dent, A. C. E., 2010. Electrically active bioceramics: a review of interfacial responses. Annals of Biomedical Engineering, 38 (6), pp. 2079-2092.

Topolov, V. Y., Krivoruchko, A. V., Bowen, C. R. and Panich, A. A., 2010. Hydrostatic Piezoelectric Coefficients of the 2-2 Composite Based on 011 -poled 0.71Pb(Mg1/3Nb2/3)O-3-0.29PbTiO(3) Single Crystal. Ferroelectrics, 400 (1), pp. 410-416.

Liu, C., Shields, P., Chen, Q., Allsopp, D., Wang, W. N., Bowen, C., Phan, T. l. and Cherns, D., 2010. Variations in mechanisms of selective area growth of GaN on nano-patterned substrates by MOVPE. Physica Status Solidi (C) Current Topics in Solid State Physics, 7 (1), pp. 32-35.

Graham, A. H. D., Bowen, C. R., Taylor, J. and Robbins, J., 2009. Neuronal cell biocompatibility and adhesion to modified CMOS electrodes. Biomedical Microdevices, 11 (5), pp. 1091-1101.

Bullock, A. K., Tilley, D. G., Johnston, D. N., Bowen, C. R. and Keogh, P. S., 2009. Non-linear friction in reciprocating hydraulic rod seals: Simulation and measurement. Journal of Physics: Conference Series, 181 (1), 012009.

Baxter, F., Turner, I. G., Bowen, C. R., Gittings, J. P. and Chaudhuri, J. B., 2009. An in vitro study of electrically active hydroxyapatite-barium titanate ceramics using Saos-2 cells. Journal of Materials Science: Materials in Medicine, 20 (8), pp. 1697-1708.

Regonini, D., Satka, A., Allsopp, D. W. E., Jaroenworaluck, A., Stevens, R. and Bowen, C. R., 2009. Anodised titania nanotubes prepared in a glycerol/NaF electrolyte. Journal of Nanoscience and Nanotechnology, 9 (7), pp. 4410-4416.

Macchetta, A., Turner, I. G. and Bowen, C. R., 2009. Fabrication of HA/TCP scaffolds with a graded and porous structure using a camphene-based freeze-casting method. Acta Biomaterialia, 5 (4), pp. 1319-1327.

Hubbard, G., Abbott, S. J., Chen, Q., Allsopp, D. W. E., Wang, W. N., Bowen, C. R., Stevens, R., Satka, A., Hasko, D., Uherek, F. and Kovac, J., 2009. Wafer-scale transfer of nanoimprinted patterns into silicon substrates. Physica E-Low-Dimensional Systems & Nanostructures, 41 (6), pp. 1118-1121.

Graham, A. H. D., Bowen, C. R., Robbins, J. and Taylor, J., 2009. Formation of a porous alumina electrode as a low-cost CMOS neuronal interface. Sensors and Actuators B-Chemical, 138 (1), pp. 296-303.

Ramam, K., Bell, A. J., Bowen, C. and Chandramouli, K., 2009. Investigation of dielectric and piezoelectric properties of niobium-modified PLSZFT nanoceramics for sensor and actuator applications. Journal of Alloys and Compounds, 473 (1-2), pp. 330-335.

Gittings, J. P., Bowen, C. R., Dent, A. C. E., Turner, I. G., Baxter, F. R. and Chaudhuri, J. B., 2009. Electrical characterization of hydroxyapatite-based bioceramics. Acta Biomaterialia, 5 (2), pp. 743-754.

Richardson, P., Almond, D. P. and Bowen, C. R., 2009. A study of random capacitor networks to assess the emergent properties of dielectric composites. Ferroelectrics, 391 (1), pp. 158-167.

Topolov, V. Y., Bowen, C. R., Glushanin, S. V. and Panich, A. E., 2009. Electromechanical coupling in the novel 2-2 parallel-connected PMN-0.33PT single-domain crystal/polymer composite. Ferroelectrics, 393, pp. 27-37.

Gittings, J. P., Bowen, C. R., Dent, A. C. E., Turner, I. G., Baxter, F. R., Cartmell, S. and Chaudhuri, J., 2009. Influence of porosity on polarisation and electrical properties of hydroxyapatite based ceramics. Ferroelectrics, 390 (1), pp. 168-176.

Panzera, T. H., Borges, P. H. R., Rubio, J. C., Bowen, C. R. and Vasconcelos, W. L., 2009. Physical properties of cement composites designed for aerostatic bearings. Materials and Structures, 42 (5), pp. 605-615.

Jaroenworaluck, A., Regonini, D., Bowen, C. and Stevens, R., 2008. Nucleation and early growth of anodized TiO2 film. Journal of Materials Research, 23 (8), pp. 2116-2124.

Bowen, C., Bradley, L. R., Almond, D. and Wilcox, P. D., 2008. Flexible piezoelectric transducer for ultrasonic inspection of non-planar components. Ultrasonics, 48 (5), pp. 367-375.

Panzera, T. H., Rubio, J. C., Bowen, C. R. and Walker, P. J., 2008. Microstructural design of materials for aerostatic bearings. Cement & Concrete Composites, 30 (7), pp. 649-660.

Panzera, T. H., Rubio, J. C., Bowen, C., Vasconcelos, W. L., Strecker, K. and [No Value], [N. V.], 2008. Correlation between structure and pulse velocity of cementitious composites. Advances in Cement Research, 20 (3), pp. 101-108.

Giddings, P., Bowen, C. R., Butler, R. and Kim, H. A., 2008. Characterisation of actuation properties of piezoelectric bi-stable carbon-fibre laminates. Composites Part A Applied Science and Manufacturing, 39 (4), pp. 697-703.

Topolov, V. Y. and Bowen, C. R., 2008. Characteristics of 1-3-type ferroelectric ceramic/auxetic polymer composites. Modelling and Simulation in Materials Science and Engineering, 16, 015007.

Giddings, P. F., Bowen, C. R. and Kim, H. A., 2008. Characterization of force-deflection behavior of piezoelectrically actuated bistable composite laminate under two-axis constraint. Advances in Science and Technology, 56, pp. 380-385.

Gabbrielli, R., Turner, I. G. and Bowen, C. R., 2008. Development of modelling methods for materials to be used as bone substitutes. Key Engineering Materials, 361-363, pp. 903-906.

Bowen, C. R., Dent, A. C. E., Almond, D. P. and Comyn, T. P., 2008. Modelling Power Law Dependencies of Frequency Dependent AC Conductivity and Permittivity of Conductor-Relaxor Composites. Ferroelectrics, 370, pp. 166-175.

Stevens, R., Regonini, D., Bowen, C. R. and Jaroenworakluck, A., 2008. Nanosized Titania, a smart material or is it just clever? Advanced Materials Research, 55-57, pp. 23-36.

Topolov, V. Y., Krivoruchko, A., Bisegna, P. and Bowen, C., 2008. Orientation effects in 1-3 composites based on 0.93Pb(Zn1/3Nb2/3)O3- 0.07PbTiO3 single crystals. Ferroelectrics, 376 (1), pp. 140-152.

Kar, J. K., Stevens, R. and Bowen, C. R., 2008. Rare-earth cuprates for ceramic colouring application - An investigation. Journal of Alloys and Compounds, 455 (1-2), pp. 121-129.

Baxter, F. R., Turner, I. G., Bowen, C. R., Gittings, J. P., Chaudhuri, J. B. and Lewis, R. W. C., 2008. The structure and properties of electroceramics for bone graft substitution. Key Engineering Materials, 361-363 I, pp. 99-102.

Kar, J., Stevens, R. and Bowen, C., 2007. Processing and characterisation of various mixed oxide and perovskite-based pigments for high temperature ceramic colouring application. Journal of Alloys and Compounds, 461 (1-2), pp. 77-84.

Regonini, D., Bowen, C. R., Stevens, R., Allsopp, D. and Jaroenworaluck, A., 2007. Anodised TiO2 nano-tubes: Voltage ramp influence on the nano-structured oxide and investigation of phase changes promoted by thermal treatments. Physica Status Solidi (A), 204 (6), pp. 1814-1819.

Bowen, C. R., Salo, A. I. T., Butler, R., Chang, E. and Kim, H. A., 2007. Bi-stable composites with piezoelectric actuators for shape change. Key Engineering Materials, 334-335, pp. 1109-1112.

Gittings, J. P., Bowen, C. R., Turner, I. G., Baxter, F. and Chaudhuri, J., 2007. Characterisation of ferroelectric-calcium phosphate composites and ceramics. Journal of the European Ceramic Society, 27 (13-15), pp. 4187-4190.

Kar, J. K., Stevens, R. and Bowen, C. R., 2007. Effect of cerium oxide on colour hue of praseodymium-zircon yellow pigment. Advances in Applied Ceramics, 106 (4), pp. 175-179.

Dent, A. C. E., Bowen, C. R., Stevens, R., Cain, M. G. and Stewart, M., 2007. Effective elastic properties for unpoled barium titanate. Journal of the European Ceramic Society, 27 (13-15), pp. 3739-3743.

Jaroenworaluck, A., Regonini, D., Bowen, C. R., Stevens, R. and Allsopp, D., 2007. Macro, micro and nanostructure of TiO2 anodised films prepared in a fluorine-containing electrolyte. Journal of Materials Science, 42 (16), pp. 6729-6734.

Topolov, V. Y., Krivoruchko, A. V. and Bowen, C. R., 2007. Maxima of effective parameters of novel piezo-composites based on relaxor-ferroelectric single crystals. Ferroelectrics, 351, pp. 145-152.

Bowen, C. R., Butler, R., Jervis, R., Kim, H. A. and Salo, A. I. T., 2007. Morphing and shape control using unsymmetrical composites. Journal of Intelligent Material Systems and Structures, 18 (1), pp. 89-98.

Lewis, R. W. C., Dent, A. C. E. and Bowen, C. R., 2007. Network modelling of 3-3 piezocomposite materials. Ferroelectrics, 351, pp. 216-224.

Wilson, S. A., Jourdain, R. P. J., Zhang, Q., Dorey, R. A., Bowen, C. R., Willander, M., Wahab, Q. U., Safaa, M. A. H., Nur, O., Quandt, E., Johansson, C., Pagounis, E., Kohl, M., Matovic, J., Samel, B., van der Wijngaart, W., Jager, E. W. H., Carlsson, D., Djinovic, Z., Wegener, M., Moldovan, C., Iosub, R., Abad, E., Wendlandt, M., Rusu, C. and Persson, K., 2007. New materials for micro-scale sensors and actuators An engineering review. Materials Science & Engineering R - Reports, 56, pp. 1-129.

Bowen, C. R. and Topolov, V. Y., 2007. Piezoelectric activity and sensitivity of novel composites based on barium titanate-hydroxyapatite composite ceramics. Advances in Composite Materials and Structures, Parts 1 and 2, 334-335, pp. 1113-1116.

Bradley, L. R., Bowen, C. R., McEnaney, B. and Johnson, D. C., 2007. Shear properties of a carbon/carbon composite with non-woven felt and continuous fibre reinforcement layers. Carbon, 45 (11), pp. 2178-2187.

Dent, A. C. E., Bowen, C. R., Stevens, R., Cain, M. G. and Stewart, M., 2007. Tensile Strength of Active Fibre Composites - Prediction and Measurement. Ferroelectrics, 368, pp. 447-453.

Panteny, S., Bowen, C. R. and Stevens, R., 2006. Characterisation of barium titanate-silver composites part II: Electrical properties. Journal of Materials Science, 41 (12), pp. 3845-3851.

Panteny, S., Bowen, C. R. and Stevens, R., 2006. Characterisation of barium titanate-silver composites, part I: Microstructure and mechanical properties. Journal of Materials Science, 41 (12), pp. 3837-3843.

Almond, D. P., Bowen, C. R. and Rees, D. A. S., 2006. Composite dielectrics and conductors: Simulation, characterization and design. Journal of Physics D: Applied Physics, 39, pp. 1295-1304.

Bowen, C. R., Gittings, J., Turner, I. G., Baxter, F. and Chaudhuri, J. B., 2006. Dielectric and piezoelectric properties of hydroxyapatite-BaTiO3 composites. Applied Physics Letters, 89 (13), 132906.

Bowen, C. R., Dent, A. C. E., Nelson, L. J., Stevens, R., Cain, M. G. and Stewart, M., 2006. Failure and volume fraction dependent mechanical properties of composite sensors and actuators. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220 (11), pp. 1655-1663.

Bezus, S. V., Topolov, V. Y. and Bowen, C. R., 2006. High-performance 1-3-type composites based on (1-x)Pb(A(1/3)Nb(2/3))O-3-xPbTiO(3) single crystals (A = Mg, Zn). Journal of Physics D: Applied Physics, 39 (9), pp. 1919-1925.

Bowen, C. R., Stevens, R., Nelson, L. J., Dent, A. C. E., Dolman, G., Su, B., Button, T. W., Cain, M. G. and Stewart, M., 2006. Manufacture and characterization of high activity piezoelectric fibres. Smart Materials and Structures, 15 (2), pp. 295-301.

Bowen, C. R. and Almond, D. P., 2006. Modelling the 'universal' dielectric response in heterogeneous materials using microstructural electrical networks. Materials Science and Technology, 22 (6), pp. 719-724.

Bowen, C. R., Nelson, L. J., Stevens, R., Cain, M. G. and Stewart, M., 2006. Optimisation of interdigitated electrodes for piezoelectric actuators and active fibre composites. Journal of Electroceramics, 16 (4), pp. 263-269.

Dent, A. C. E., Nelson, L. J., Bowen, C. R., Stevens, R., Cain, M. and Stewart, M., 2005. Characterisation and properties of fine scale PZT fibres. Journal of the European Ceramic Society, 25 (12 SPEC ISS), pp. 2387-2391.

Ramesh, R., Kara, H. and Bowen, C. R., 2005. Finite element modelling of dense and porous piezoceramic disc hydrophones. Ultrasonics, 43 (3), pp. 173-181.

Burianova, L., Bowen, C. R., Prokopova, M. and Sulc, M., 2005. Laser interferometric displacement measurements of multi-layer actuators and PZT ceramics. Ferroelectrics, 320, pp. 629-637.

Topolov, V. Y., Glushanin, S. V. and Bowen, C. R., 2005. Piezoelectric response of porous ceramic and composite materials based on Pb(Zr,Ti)O-3: experiment and modelling. Advances in Applied Ceramics, 104 (6), pp. 300-305.

Kar, J. K., Stevens, R. and Bowen, C. R., 2005. Processing and characterisation of Pr-zircon pigment powder. Advances in Applied Ceramics, 104 (5), pp. 233-238.

Panteny, S., Stevens, R. and Bowen, C. R., 2005. The frequency dependent permittivity and AC conductivity of random electrical networks. Ferroelectrics, 319, pp. 199-208.

Almond, D. P. and Bowen, C. R., 2004. Anomalous power law dispersions in ac conductivity and permittivity shown to be characteristics of microstructural electrical networks. Physical Review Letters, 92 (15), 157601.

Panteny, S., Stevens, R. and Bowen, C. R., 2004. Characterisation and modelling of barium titanate-silver composites. Integrated Ferroelectrics, 63, pp. 131-135.

Ramesh, R., Kara, H. and Bowen, C. R., 2004. Characteristics of piezoceramic and 3-3 piezocomposite hydrophones evaluated by finite element modelling. Computational Materials Science, 30 (3-4), pp. 397-403.

Nelson, L. J., Bowen, C. R., Stevens, R., Cain, M. and Stewart, M., 2004. Evaluation of high field responses of fine scale piezoelectric fibres. Integrated Ferroelectrics, 63, pp. 41-47.

Topolov, V. Y. and Bowen, C. R., 2004. High piezoelectric sensitivity composites based on ferroelectric ceramics. Integrated Ferroelectrics, 63, pp. 683-689.

Kara, H., Ramesh, R., Stevens, R., Jayasundere, N., Humphrey, V. and Bowen, C. R., 2004. Hydrophone arrays assembled from PZT ceramic foams. Integrated Ferroelectrics, 63, pp. 201-206.

Kar, J. K., Stevens, R. and Bowen, C. R., 2004. Novel terbium-zircon yellow pigment. Journal of Materials Science, 39 (18), pp. 5755-5763.

Bowen, C. R., Perry, A., Lewis, A. C. F. and Kara, H., 2004. Processing and properties of porous piezoelectric materials with high hydrostatic figures of merit. Journal of the European Ceramic Society, 24 (2), pp. 541-545.

Bowen, C., 2004. Shaping the future of sports equipment. Materials World, 12 (5), pp. 24-26.

Pritchard, J., Ramesh, R. and Bowen, C. R., 2004. Time-temperature profiles of multi-layer actuators. Sensors and Actuators A-Physical, 115 (1), pp. 140-145.

Nelson, L. J., Bowen, C. R., Stevens, R., Cain, M. and Stewart, M., 2003. High field behaviour of piezoelectric fibre composites. Proceedings of SPIE - The International Society for Optical Engineering, 5053, pp. 544-555.

Nelson, L. J., Bowen, C. R., Stevens, R., Cain, M. and Stewart, M., 2003. Modelling and measurement of piezoelectric fibres and interdigitated electrodes for the optimisation of piezofibre composites. Proceedings of SPIE - The International Society for Optical Engineering, 5053, pp. 556-567.

Bowen, C. R. and Topolov, V. Y., 2003. Piezoelectric sensitivity of PbTiO3-based ceramic/polymer composites with 0-3 and 3-3 connectivity. Acta Materialia, 51 (17), pp. 4965-4976.

Kara, H., Ramesh, R., Stevens, R. and Bowen, C. R., 2003. Porous PZT ceramics for receiving transducers. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 50 (3), pp. 289-296.

Deegan, D., Chapman, C. and Bowen, C., 2003. The production of shaped glass-ceramic materials from inorganic waste precursors using controlled atmospheric DC plasma vitrification and crystallisation. High Temperature Material Processes, 7 (3), pp. 367-372.

Pritchard, J. and Bowen, C. R., 2002. Characterisation of multi-layer actuators. Ferroelectrics, 273, 2633-+.

Panteny, S. R., Bowen, C. R. and Stevens, R., 2002. Investigation into the processing and characterisation of piezoelectric nanocomposites. Advances in Composite Materials and Structures, Parts 1 and 2, 206-2, pp. 1313-1316.

Kara, H., Perry, A., Stevens, R. and Bowen, C. R., 2002. Modelling of 3-3 piezocomposites for hydrophones. British Ceramic Transactions, 101 (4), pp. 139-142.

Perry, A., Bowen, C. R., Kara, H. and Mahon, S., 2002. PZT - Polymer composites for hydrophones: Production and modelling. Advances in Composite Materials and Structures, Parts 1 and 2, 206-2, pp. 1505-1508.

Bowen, C. R. and Kara, H., 2002. Pore anisotropy in 3-3 piezoelectric composites. Materials Chemistry and Physics, 75, pp. 45-49.

Ramesh, R., Kara, H. and Bowen, C. R., 2002. The dielectric, mechanical and piezoelectric properties of 3-3 piezoelectric composites. Ferroelectrics, 273, pp. 383-388.

Kara, H., Perry, A., Stevens, R. and Bowen, C. R., 2001. 3-3 piezocomposites: A comparison between the models and experimental results. 25th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B, 22 (4), pp. 543-554.

Bowen, C. R., Perry, A., Stevens, R. and Mahon, S., 2001. Analytical and numerical modelling of 3-3 piezoelectric composites. Integrated Ferroelectrics, 32 (1-4), pp. 1025-1034.

Bowen, C. R., Perry, A., Kara, H. and Mahon, S. W., 2001. Analytical modelling of 3-3 piezoelectric composites. Journal of the European Ceramic Society, 21 (10-11), pp. 1463-1467.

Nelson, L. J. and Bowen, C. R., 2001. Determination of the piezoelectric properties of fine scale PZT fibres. Key Engineering Materials, 206-213, pp. 1509-1512.

Kara, H., Perry, A., Stevens, R. and Bowen, C. R., 2001. Interpenetrating PZT/polymer composites for hydrophones: Models and experiments. Ferroelectrics, 265, pp. 317-332.

Perry, A., Bowen, C. R., Kara, H. and Mahon, S., 2001. Modelling of 3-3 piezocomposites. Software for Electrical Engineering Analysis and Design V, 3, pp. 67-76.

Pritchard, J., Bowen, C. R. and Lowrie, F., 2001. Multilayer actuators: Review. British Ceramic Transactions, 100 (6), pp. 265-273.

Conference or Workshop Items

Glover, E., Bowen, C., Gathercole, N., Pountney, O., Ball, M., Spacie, C. and Seunarine, K., 2017. Graphene based skins on thermally responsive composites for deicing applications. In: Behavior and Mechanics of Multifunctional Materials and Composites 2017, 2017-03-25 - 2017-03-25.

Sergejevs, A., Clarke, C., Allsopp, D., Marugan, J. and Bowen, C., 2016. A calibrated UV LED light source for photocatalytic experimentation. In: ASEAN-EU STI Days, 2016-05-10 - 2016-05-12, 44B Ly Thuong Kiet Street.

Persson, L., Plummer, A., Bowen, C. and Brooks, I., 2016. A lightweight, low leakage piezoelectric servovalve. In: Recent Advances in Aerospace Actuation Systems and Components 2016, 2016-03-16 - 2016-03-18.

Harris, P., Litak, G., Bowen, C. R. and Arafa, M., 2016. A composite beam with dual bistability for enhanced vibration energy harvesting. In: Dhar, N. K. and Dutta, A. K., eds. Energy Harvesting and Storage: Materials, Devices, and Applications VII, 2016-04-19. SPIE. (Proceedings of SPIE - The International Society for Optical Engineering; 9865)

Bowen, C., 2016. Additive manufacturing for next generation actuation. In: Recent Advances in Aerospace Actuation Systems and Components, 2016-03-16, Toulouse.

Persson, L., Plummer, A., Bowen, C. and Brooks, I., 2015. Design and Modelling of a Novel Servovalve Actuated by a Piezoelectric Ring Bender. In: ASME/Bath Symposium on Fluid Power and Motion Control, 2015-10-12 - 2015-10-14.

Zabek, D., Bowen, C. R. and Taylor, J. T., 2015. Electrical capacitance with meshed electrodes for piezo- and pyro-electric energy harvesting applications. In: 2015 Joint IEEE International Symposium on the Applications of Ferroelectrics (ISAF), International Symposium on Integrated Functionalities (ISIF) and Piezoelectric Force Microscopy Workshop (PFM), 2015-05-24 - 2015-05-27, Singapore. IEEE, pp. 83-86.

Le Boulbar, E. D. and Bowen, C. R., 2015. Study of Y-cut LiNbO3 (010) crystal under oscillated vibration at high temperature for energy harvesting in hostile environment. In: 2015 Joint IEEE International Symposium on the Applications of Ferroelectric (ISAF), International Symposium on Integrated Functionalities (ISIF), and Piezoelectric Force Microscopy Workshop (PFM), 2015-05-24 - 2015-05-27, Singapore, Singapore.

Wales, D., Grand, J., Physick, A., Burke, R., Ting, V., Burrows, A., Edler, K., Mintova, S. and Bowen, C., 2015. Determining the suitability of common metal-organic frameworks for exhaust gas sensing. In: 4th Laboratoire Catalyse et Spectrochimie Symposium (4th LCS symposium), 2015-04-28 - 2015-04-29.

Bhalla, N., Pathak, S., Bowen, C., Taylor, J., Di Lorenzo, M., Pula, G. and Estrela, P., 2015. Field-effect devices for kinase drug discovery. In: 4th International Conference on Bio-Sensing Technology, 2015-05-10 - 2015-05-13.

Wales, D., Grand, J., Mintova, S., Ting, V., Burke, R., Edler, K., Burrows, A. and Bowen, C., 2015. In-situ characterisation of the interaction of metal-organic frameworks with gases::towards novel exhaust gas sensors. In: Characterisation of Porous Materials 7 (CPM-7), 2015-05-03 - 2015-05-06, Delray Beach Marriott HOTEL.

Lee, J., Brampton, C. J., Read, J., Bowen, C. R., Wardle, B. L. and Kim, H. A., 2015. Investigation of aligned conductive polymer nanocomposites for actuation of bistable laminates. In: 23nd AIAA/AHS Adaptive Structures Conference 2015, 2015-01-05 - 2015-01-09. American Institute of Aeronautics and Astronautics Inc..

Wong, L. C. C., Pathak, S., Osterbye, T., Buus, S., Bowen, C., Taylor, J. and Estrela, P., 2015. Multichannel open circuit potential biosensors: towards peptide microarrays. In: 4th International Conference on Bio-Sensing Technology, 2015-05-10 - 2015-05-13.

Hockings, N., Iravani, P. and Bowen, C., 2014. Artificial ligamentous joints:Methods, materials and characteristics. In: IEEE-RAS International Conference on Humanoid Robots, 2014-11-18 - 2014-11-20.

Harris, P., Bowen, C., Betts, D. and Kim, A., 2014. Manufacture and characterisation of piezoelectric broadband energy harvesters based on asymmetric bistable laminates. In: American Society of Composites Conference, 2014-09-08.

Beasley, A., 2014. The Implications of Second Order Effects of Practical Components on Storing Energy Harvested by Pyro-electric and Piezo-electric Effects. In: Clarke, C., Bowen, C. and Zabek, D. A., eds. nanosmat, 2014-09-08 - 2014-09-11, Trinity College.

Brampton, C. J., Bowen, C. R., Buschhorn, S. T., Lee, J., Pickering, S. G., Wardle, B. L. and Kim, H. A., 2014. Actuation of bistable laminates by conductive polymer nanocomposites for use in thermal-mechanical aerosurface de-icing systems. In: 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, 2014, 2014-01-13 - 2014-01-17, National Harbor.

Betts, D. N., Guyer, R. A., Le Bas, P.-Y., Bowen, C. R., Inman, D. and Kim, H. A., 2014. Modelling the dynamic response of bistable composite plates for piezoelectric energy harvesting. In: 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, 2014, 2014-01-13 - 2014-01-17, National Harbor.

Bertin, M. J. F., Plummer, A. R., Bowen, C. R. and Johnston, D. N., 2014. An investigation of piezoelectric ring benders and their potential for actuating servo valves. In: ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014, 2014-09-10 - 2014-09-12. Web Portal ASME (American Society of Mechanical Engineers), V001T01A034.

Harris, P., Bowen, C. and Kim, H. A., 2014. Manufacture and characterisation of piezoelectric broadband energy harvesters based on asymmetrie bistable laminates. In: 29th Annual American Society for Composites Technical Conference, 2014-09-08 - 2014-09-10.

Betts, D., Bowen, C. R., Inman, D. J. and Kim, H. A., 2014. Novel model for arbitrary shape bistable piezoelectric-composite plates for vibration-based energy harvesting. In: Active and Passive Smart Structures and Integrated Systems VIII, part of SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2014-03-10.

Zabek, D., Taylor, J. and Bowen, C. R., 2014. Performance of thin film polyvinylidenefluoride (PVDF) for pyroelectric energy harvesting. In: 2014 Joint IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices and Workshop on Piezoresponse Force Microscopy, ISAF/IWATMD/PFM 2014, 2014-05-12 - 2014-05-16.

Henderson, J.-P., Plummer, A. R., Johnston, D. N. and Bowen, C. R., 2013. The influence of passive valve characteristics on the performance of a piezo pump for hydraulic actuation. In: Bath/ASME Symposium on Power Transmission and Motion Control FPMC2013, 2013-10-08 - 2013-10-10, Florida.

Bowen, C.R., Topolov, V.Y., Betts, D.N. and Kim, H.A., 2013. 2-2 composites based on [011]-poled relaxor-ferroelectric single crystals:from the piezoelectric anisotropy to the hydrostatic response. In: Schmid, U., Sanchez de Rojas Aldavero, J. L. and Leester-Schaedel, M., eds. Conference Smart Sensors, Actuators, and MEMS VI, 2013-04-24 - 2013-04-26. Bellingham, WA: SPIE - Society of Photo-Optical Instrumentation Engineers. (Proceedings of SPIE; 8763)

Topolov, V. Y., Bowen, C. R. and Krivoruchko, A. V., 2013. Role of domain orientations in forming the hydrostatic performance of novel 2-2 single crystal/polymer composites. In: 7th International Seminar on Ferroelastic Physics, ISFP 2012, 1970-01-01 - 2013-09-13.

Sangiah, D., Plummer, A. R. and Bowen, C. R., 2012. Performance Optimization of a Two-stage Piezohydraulic Servovalve. In: 8th International Fluid Power Conference (IFK), 2012-03-26 - 2012-03-28.

Pesce, G. L., Ball, R. J., Bowen, C. R., Kurchania, R. and Bhalla, S., 2012. Monitoring hydration in lime - metakaolin composites. In: Russell, M., ed. 32nd Cement & Concrete Science Conference, 2012-09-16 - 2012-09-17.

Pesce, G. L., Ball, R. J., Bowen, C. R., Kurchania, R. and Bhalla, S., 2012. Monitoring hydration in lime - metakaolin composites. In: Ferreira, V. M., Dias, A. B., Afonso, A. S. and de Brito, J., eds. Congress of Innovation on Sustainable Construction (CINCOS'12), 2012-09-19 - 2012-09-21.

Betts, D. N., Kim, H. A., Bowen, C. R. and Inman, D. J., 2012. Static and dynamic analysis of bistable piezoelectric- composite plates for energy harvesting. In: 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2012-04-23 - 2012-04-26. American Institute of Aeronautics and Astronautics (AIAA).

Sangiah, D., Plummer, A. R., Bowen, C. R. and Guerrier, P., 2011. Modelling and experimental validation of a novel piezohydraulic servovalve. In: 2011 Dynamic Systems and Control Conference, 2011-10-31 - 2011-11-02, USA.

Sangiah, D., Plummer, A. R., Bowen, C. R. and Guerrier, P., 2011. A vortex valve for flow control in fluid systems. In: 12th Scandinavian conference on Fluid Power (SICFP'11), 2011-05-17 - 2011-05-20, Finland.

Betts, D.N., Alicia Kim, H. and Bowen, C.R., 2011. Design optimization of stiffness characteristics for bistable composite laminates. In: 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2011-04-03 - 2011-04-06. American Institute of Aeronautics and Astronautics.

Betts, D.N., Alicia Kim, H. and Bowen, C.R., 2011. Optimization of bistable composite laminates with actuated state-change. In: 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2011-04-03 - 2011-04-06. American Institute of Aeronautics and Astronautics.

Šoltýs, J., Chlpík, J., Držík, M., Šatka, A., Lewis, R., Bowen, C. and Allsopp, D., 2011. Polarization properties of light diffracted off 2D photonic crystal. In: 17th Conference of Czech and Slovak Physicists, 2011-09-05 - 2011-09-08. Slovak Physical Society, pp. 97-98.

Turner, I. G., Bowen, C. R., Baxter, F. R., Gittings, J. and Chaudhuri, J. B., 2011. The effect of poling on the in vitro response to poled HA and HABT composites for clinical applications. In: 24th European Conference on Biomaterials, EBS 2011, 2011-09-04 - 2011-09-08.

Baxter, F., Turner, I., Bowen, C., Gittings, J. P. and Chaudhuri, J., 2009. A study of the morphology of human bone cells cultured on hydroxyapatite-barium titanate composites. In: Proceedings of the European Society of Biomaterials, 2009-09-01.

Giddings, P., Bowen, C. and Kim, H. A., 2009. A coupled field finite element model to predict actuation properties of piezoelectrically actuated bistable composites. In: 17th International Conference on Composite Materials, ICCM-17, 2009-07-27 - 2009-07-31.

Baxter, F., Turner, I., Bowen, C., Gittings, J. P. and Chaudhuri, J. B., 2009. Piezoelectric Hydroxyapatite Composites for Bone Graft Substitution. In: Proceedings of the UK Society for Biomaterials, 2009-07-02 - 2009-07-03.

Kim, H. A., Betts, D. N., Salo, A. I. T. and Bowen, C. R., 2009. Shape memory alloy actuation for asymmetric bistable composites. In: 17th Annual International Conference on Composites/Nano Engineering, 2009-07-26 - 2009-08-01.

Giddings, P. F., Bowen, C. R., Salo, A. and Kim, H. A., 2009. Bistable composite laminates - effects of laminate composition on cured-shape and response to thermal load. In: 15th International Conference on Composite Structures, 2009-06-01 - 2009-06-05.

Betts, D. N., Fong, Y. T. T., Salo, A., Bowen, C. R. and Kim, H. A., 2009. Characterization of the cured shapes of arbitrary layup composite laminates. In: 15th International Conference on Composite Structures, 2009-06-01 - 2009-06-05.

Branson, D., Wang, F., Bowen, C. and Keogh, P., 2009. Dynamic simulation model of a hydraulic valve utilizing the hörbiger plate principle and piezoactuation to achieve high bandwidth and flow performance. In: 2008 ASME International Mechanical Engineering Congress and Exposition, IMECE 2008, 2008-10-31 - 2008-11-06.

Giddings, P. F., Kim, H. A. and Bowen, C. R., 2009. Piezoelectrically actuated bistable composites: a finite element model to predict cured shape and actuation properties. In: 17th Annual International Conference on Composites/Nano Engineering, 2009-07-26 - 2009-08-01.

Ouyang, X., Tilley, D., Keogh, P., Yang, H., Johnston, D. N., Bowen, C. and Hopkins, P., 2008. Piezoelectric actuators for screw-in cartridge valves. In: 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2008-07-02 - 2008-07-05.

Giddings, P., Bowen, C. and Kim, H. A., 2008. Characterisation of force-deflection behaviour of piezoelectrically actuated bistable composite laminate under two-axis constraint. In: 3rd International Conference on Smart Materials, Structures and Systems - Emboding Intelligence in Structures and Integrated Systems, CIMTEC 2008, 2008-06-08 - 2008-06-13.

Phani, A. S., Butler, R., Habgood, S. and Bowen, C. R., 2008. Analysis of wing morphing via frame buckling. In: 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2008-04-07 - 2008-04-10.

Hao, S., Taylor, J., Miles, A. W. and Bowen, C. R., 2008. An implantable system for the in vivo measurement of Hip and Knee migration and micromotion. In: ICSES 2008 International Conference on Signals and Electronic Systems, ICSES'08, 2008-09-14 - 2008-09-17.

Branson, D. T., Wang, F. C., Johnston, D. N., Tilley, D. G., Bowen, C. R. and Keogh, P. S., 2008. Modeling for a High-Bandwidth High-Flow Valve Design Based on Horbiger Plate Operation. In: ASME Fluids Engineering Division Summer Conference, 2008-01-01.

Baxter, F., Turner, I., Bowen, C., Chaudhuri, J. and Gittings, J. P., 2008. The attachment of osteoblast-like cells to hydroxyapatite-barium titanate ceramics. In: World Biomaterials Congress, 2008-05-25 - 2008-06-01.

Gabbrielli, R., Bowen, C. R. and Turner, I. G., 2007. Porous matter design for load bearing capacity. In: European Society for Biomaterials, 2007-09-01.

Bowen, C. R., Gittings, J. P., Turner, I. G., Baxter, F. and Chaudhuri, J., 2007. Properties of ferroelectric-hydroxyapatite composites as polarised bone substitutes. In: European Society for Biomaterials, 2007-09-01.

Baxter, F. R., Turner, I. G., Bowen, C. R., Gittings, J., Chaudhuri, J. B. and Lewis, R. W. C., 2007. The Structure and Properties of Electroceramics for Bone Graft Substitution. In: The Structure and Properties of Electroceramics for Bone Graft Substitution, UKSB, 2007-01-01.

Bowen, C. R., Salo, A. I. T., Butler, R., Chang, E. and Kim, H. A., 2006. Bi-stable composites with piezoelectric actuators for shape change. In: 5th Asian-Australian Conference on Composite Materials, 2006-11-01.

Gittings, J., Baxter, F., Bowen, C. R., Turner, I. G. and Chaudhuri, J., 2006. Characterisation and poling of ferroelectric-calcium phosphate biocomposites. In: Proceedings of the 10th Electroceramics Conference, 2006-01-01.

Regonini, D., Bowen, C. R., Allsopp, A. and Stevens, R., 2005. Nano-porous structures prepared by electrochemical anodisation of aluminium. In: Multi-Material Micro Manufacture, 2005-01-01.

Ramesh, R., Kara, H. and Bowen, C. R., 2004. Characteristics of piezoceramic and 3-3 piezocomposite hydrophones evaluated by finite element modelling. In: Computational Materials Science, 2004-01-01.

Patent

Graham, T., Taylor, J., Bowen, C. and Robbins, J., 2012. Biocompatible electrode. US2012091011 (A1), 19 April 2012.

Timothy Peter, M., Jonathan James, W., Joseph Michael, D., Richard Stuart, B., Edwards, M., Bowen, C., Allsopp, D. and Liu, C., 2012. Diamond composite substrate for semiconductor devices. H01L21/02- GB2481687 (A), 04 January 2012.

Graham, A., Taylor, J., Bowen, C. and Robbins, J., 2011. Biocompatible Electrode. G01N33/487- EP2356448 (A1), 17 August 2011.

Gabbrielli, R., Turner, I., Bowen, C. and Magalini, E., 2011. Improvements in or Relating to Joints and/or Implants. A61F2/30- EP2328517 (A1), 08 June 2011.

Graham, A. H. D., Taylor, J., Bowen, C. R. and Robbins, J., 2009. Biocompatible electrode. B01D43/00; G01N27/26; H01L21/28; H01L29/41- US200913128440 20091110, 2009.

Other

Taylor, J. and Bowen, C., 2012. Biocompatible CMOS Electrode Array. University of Bath.

This list was generated on Wed Aug 16 21:17:19 2017 IST.