2012
Wang, L and Wilson, M (2012)
Computations of Flow and Heat Transfer in a Rotor-Stator System with Externally-Induced Ingestion
International Journal of Gas Turbine, Propulsion and Power Systems, v.4, n.1, (9 pages), ISSN 1882-5079
2011
Karnahl, J., von Wolfersdorf, J, Tham, K-M., Wilson, M and Lock G. D. (2011)
CFD Simulations of Flow and Heat Transfer in a Pre-Swirl System: Influence of Rotating-Stationary Domain Interface
ASME Turbo Expo paper GT2011-45085, to be presented
Sangan, C. M., Pountney, O. J., Wilson, M., Owen J. M. and Lock, G. D. (2011)
Hot-Gas Ingestion through Turbine Rim Seals Part 1: Externally-Induced Ingress
ASME Turbo Expo paper GT2011-45310, to be presented
Sangan, C. M., Pountney, O. J., Zhou, K. Y., Wilson, M., Owen J. M. and Lock, G. D. (2011)
Hot-Gas Ingestion through Turbine Rim Seals Part 2: Rotationally-Induced Ingress
ASME Turbo Expo paper GT2011-45313, to be presented
Zhou, K., Wilson, M., Lock, G.D. and Owen, J.M. (2011)
Computation of Ingestion through Gas Turbine Rim Seals
ASME Turbo Expo paper GT2011-45314, to be presented
2010
Kakade, V. U., Wilson, M., Lock, G. D., Owen, J. M. and Mayhew, J. E. (2010)
Effect of Radial Location of Nozzles on Heat Transfer in Pre-Swirl Cooling Systems
J. Turbomachinery, v. 133, n. 2, 021023 (2011) (8 pages), ISSN 0889-504X
(formerly ASME paper GT2009-59090)
Owen, J. M., Pountney O., Lock G. D., Wilson, M and Zhou, K (2010)
Theoretical Prediction of Ingress through Turbine Rim Seals. Part 1: Externally-Induced Ingress
ASME Turbo Expo paper GT2010-23346, to be published in J. Turbomachinery
Javiya, U., Chew, J, Hills, N., Zhou, L., Wilson, M and Lock G. D. (2010)
CFD Analysis of Flow and Heat Transfer in a Direct Transfer Pre-swirl System
ASME Turbo Expo paper GT2010-22964, to be published in J. Turbomachinery
2009
Kakade, V.U., Lock, G. D., Wilson, M.,Owen, J. M. and Mayhew, J. E. (2009a,b)
Accurate heat transfer measurements using thermochromic liquid crystal.
Part 1: Calibration and characteristics of crystals
Int. J. Heat and Fluid Flow, v. 30, n. 5, pp 939-949
Part 2: Part 2: Application to a rotating disc
Int. J. Heat and Fluid Flow, v. 30, n. 5, pp 950-959
Lewis, P.R., Wilson, M., Lock, G. D. and Owen, J. M. (2009)
Effect of radial location of nozzles on performance of preswirl systems: a computational and theoretical study
Proc Institution of Mechanical Engineers, Part A: Journal of Power and Energy, v. 223, n. 2, pp 179-190, ISSN 0957-6509
2008
Lewis, P.R., Wilson, M., Lock, G. D. and Owen, J. M. (2008)
Effect Of Radial Location Of Nozzles On Performance Of Pre-Swirl Systems
ASME Turbo Expo 2008, paper GT2008-50295
2007
Lewis, P.R., Wilson, M., Lock, G. D. and Owen, J. M. (2007)
Physical interpretation of flow and heat transfer in pre-swirl systems
J. Engineering for Gas Turbines and Power, v. 129, n. 3, pp 769-777, ISSN 00742-4795
(formerly ASME paper GT2006-90132)
King, M. P., Wilson, M. and Owen, J. M. (2007)
Rayleigh-Benard convection in open and closed rotating cavities
J. Engineering for Gas Turbines and Power, v. 129, n. 2, pp 305-311, ISSN 00742-4795
(formerly ASME paper GT-2005-68948)
2005
Lock, G. D., Wilson, M. and Owen, J. M. (2005)
Influence of fluid-dynamics on heat transfer in a pre-swirl rotating-disc system
J. Engineering for Gas Turbines and Power , v. 127, n. 4, pp 791-797, ISSN 00742-4795
(formerly ASME paper 04-GT-53158)
Farzaneh-Gord, M., Wilson, M. and Owen, J. M. (2005)
Numerical and theoretical study of flow and heat transfer in a pre-swirl rotor-stator system
ASME Turbo Expo 2005, paper GT-2005-68135
Lock, G. D., Yan, Y., Newton, P. J., Wilson, M. and Owen, J. M. (2005)
Heat transfer measurements using liquid crystals in a pre-swirl rotating-disc system
J. Engineering for Gas Turbines and Power , v. 127, n. 2, pp 375-382, ISSN 0742-4795
(formerly ASME paper GT-2003-38123)
2003
Farzaneh-Gord, M., Wilson, M. and Owen, J. M. (2003)
Effects of swirl and flow rate on the flow and heat transfer in a pre-swirl rotating-disc system
International Gas Turbine Congress, Tokyo, November, paper TS-064
Yan, Y., Farzaneh-Gord, M., Lock, G. D., Wilson, M. and Owen, J. M. (2003)
Fluid dynamics of a pre-swirl rotor-stator system
J. Turbomachinery , v. 125, n. 4, pp 641-647, ISSN 0889-504X
(formerly ASME paper GT-2002-30415)
2001
Karabay, H., Wilson, M. and Owen, J. M. (2001)
Approximate solutions for flow and heat transfer in pre-swirl rotating-disc systems
ASME Int. Gas Turbine and Aeroengine Cong., New Orleans, paper 2001-GT-200
Karabay, H., Wilson, M. and Owen, J. M. (2001)
Predictions of effect of swirl on flow and heat transfer in a rotating cavity
Int. J. Heat and Fluid Flow, v. 22, n. 2, pp 143-155, ISSN 0142-727X
Jaafar, A. A., Wilson, M. and Owen, J. M. (2001)
Effects of geometry on flow and heat transfer in a rotating cavity with a stationary outer casing and peripheral
flow
Proc. 4th European Conference on Turbomachinery, Florence, March 20-23, pp
357-366, ISBN 88-86281-57-9
2000
Karabay, H., Pilbrow, R., Wilson, M. and Owen, J. M. (2000)
Performance of pre-swirl rotating-disc systems
J. Engineering for Gas Turbines and Power, v. 122, pp 442-450, ISSN 0742-4795
(formerly ASME paper 99-GT-197)
Owen, J. M. and Wilson, M. (2000)
Some current research in rotating-disc systems
Turbine 2000 Int. Symp. on Heat Transfer in Gas Turbine Systems, Turkey, August 13-18
in Heat Transfer in Gas Turbine Systems, Annals of the New York Academy of Sciences,
vol 934, pp 206-221, ISBN 1-57331-329-7
Jaafar, A. A., Motallebi, F., Wilson, M. and Owen, J. M. (2000)
Flow and heat transfer in a rotating cavity with a stationary stepped casing
ASME Int. Gas Turbine and Aeroengine Cong., Munich, paper 2000-GT-281
Jaafar, A. A., Gan, X., Wilson, M. and Owen, J. M. (2000)
Flow in a rotating cavity with a stationary angled casing
Proc. 3rd Int. Symp. on Turbulence, Heat and Mass Transfer, Nagoya, pp 653-660, ISBN 4-87256-650-5
1999
Pilbrow, R., Karabay, H., Wilson, M. and Owen, J. M. (1999)
Heat transfer in a "cover-plate" pre-swirl rotating-disc system
J. Turbomachinery, v. 121, pp 249-256, ISSN 0889-504X
- A
(formerly ASME paper 98-GT-113)
Karabay, H., Chen, J. X., Pilbrow, R., Wilson, M. and Owen, J. M. (1999)
Flow in a "cover-plate" pre-swirl rotor-stator system
J. Turbomachinery, v. 121, pp 160-166, ISSN 0889-504X
- A
(formerly ASME paper 97-GT-243)
Mirzaee, I., Quinn, P., Wilson, M. and Owen, J. M. (1999)
Heat transfer in a rotating cavity with a stationary stepped casing
J. Turbomachinery, v. 121, pp 281-287, ISSN 0889-504X
- A
(formerly ASME paper 98-GT-112)
1998
Mirzaee, I., Gan, X., Wilson, M. and Owen, J. M. (1998)
Heat transfer in a rotating cavity with a peripheral inflow and outflow of cooling air
J. Turbomachinery, v. 120, pp 818-823, ISSN 0889-504X
- A
(formerly ASME paper 97-GT-136)
1997
Wilson, M., Arnold, P. D., Lewis, T. W., Mirzaee, I., Rees, D. A. S. and Owen, J. M. (1997)
Instability of flow and heat transfer in a rotating cavity with a stationary outer casing
Eurotherm 55 (Heat Transfer in Single Phase Flow), Santorini, Greece, September
- A
Wilson, M, Pilbrow, R. and Owen, J. M. (1997)
Flow and heat transfer in a pre-swirl rotor-stator system
J. Turbomachinery, v. 119, pp 364-373, ISSN 0889-504X
- A
(formerly ASME paper 95-GT-239)
Wilson, M., Karabay, H., Mirzaee, I. and Owen, J. M. (1997)
Modelling flow in internal cooling-air systems of gas-turbine engines
Proc. 2nd European Conference on Turbomachinery - Fluid dynamics and Thermodynamics, Antwerp, pp 483-490, ISBN 90-5204-032-X
- A
1996
Gan, X., Mirzaee, I., Owen, J. M., Rees, D. A. S. and Wilson, M. (1996)
Flow in a rotating cavity with a peripheral inlet and outlet of cooling air
ASME Int. Gas Turbine and Aeroengine Cong., Birmingham, paper 96-GT-309
- A
Wilson, M., Chen, J. X. and Owen, J. M. (1996)
Computation of flow and heat transfer in rotating-disc systems
Trans IMechE 3rd Int Conf on Computers in Reciprocating Engines and Gas Turbines, pp 41-49, ISBN 0 85298 984 9
- A
1995
Owen, J. M. and Wilson, M. (1995)
Rotating Cavities and Disc Heat Transfer
in Heat Transfer and Cooling in Gas Turbines, VKI Lecture series VKI LS 1995-05, ISSN 0377-8312
1994
Wilson, M. and Owen, J. M. (1994)
Axisymmetric computations of flow and heat transfer in a pre-swirl rotor-stator system
1st International Conference on Flow Interaction, Hong Kong, pp 447-450
Wilson, M, Chen, J. X., Pilbrow, R. and Owen, J. M. (1994)
Computation of flow and heat transfer in pre-swirl rotor-stator systems
ICHMT International Symposium on Turbulence, Heat and Mass Transfer, Lisbon, August
(To appear in volume of selected papers)
1993
Chen, J-X, Owen, J. M. and Wilson, M (1993)
Parallel computing techniques applied to rotor-stator systems: thermal computations
Numerical Methods in Thermal Problems, 8, ISBN 0-906674-80-8, pp 1212-1226
Chen, J-X, Owen, J. M. and Wilson, M (1993)
Parallel computing techniques applied to rotor-stator systems: fluid dynamics computations
Numerical Methods in Laminar and Turbulent Flow, 8, ISBN 0-906674-81-6, pp 899-911
Wilson, M., Syson, B. J. and Owen, J. M. (1993)
Image processing techniques applied to wide band thermochromic liquid crystals
Eurotherm 32 (Heat Transfer in Single Phase Flow), Oxford, pp 41-49
1992
Wilson, M., Kilic, M., and Owen, J. M. (1992)
Computation of flow in rotating-disc systems
in Heat Transfer in Turbomachinery: Proc. Int Symp on Heat Transfer in Turbomachinery, Begell House Inc, pp 577-590, ISBN 1-56700-016-9
Wilson, M. (1992)
Parallel multigrid computation of rotating disc flows
PACTA `92 (Parallel Computing and Transputers Applications `92), Barcelona, Spain, 21-25 September
1991
Wilson, M. (1991)
Parallel Multigrid Computation of Rotating Flows
Multiblock and Multigrid Methods on High Performance Computers, SERC Workshop, University of Bath
Wilson, M. (1991)
Porting Multi-Grid Codes to Parallel Systems
Parallel Computing in CFD, SERC Workshop, SERC Daresbury Laboratory, May