Credits:
| 6 |
Level:
| Intermediate (FHEQ level 5) |
Period: |
Semester 1
|
Assessment:
| CW 15%, EX 85% |
Supplementary Assessment: | ME20013 Re- Assessment Examination (where allowed by programme regulations) |
Requisites:
| This unit is not normally available to visiting/exchange students. |
Description:
| Aims: To introduce the analytical techniques that are used in the analysis and design of control systems.
To examine the behaviour of a variety of control systems commonly used in engineering applications.
Learning Outcomes: On successful completion of this unit the student will have:
* Predicted the behaviour of simple control systems.
* Determined the frequency response and stability characteristics of simple control systems.
* Improved steady state and dynamic performance using compensation techniques.
Skills: Problem solving; numeracy; working independently.
Content: System modelling. Open and closed loop control. Block diagram representation. Block diagram manipulation. Transfer functions and Laplace notation. Transient performance of simple systems. System errors. Frequency response representation of systems. Bode diagrams. System stability assessment techniques. System identification. Compensation techniques. Introduction to MATLAB® for control system design and analysis. Control laboratory experiment.
|
Programme availability:
|
ME20013 is Compulsory on the following programmes:
Department of Mechanical Engineering
- UEME-AFB26 : BEng (hons) Aerospace Engineering (Full-time) - Year 2
- UEME-AKB26 : BEng (hons) Aerospace Engineering (Thick Sandwich) - Year 2
- UEME-AFB01 : BEng (hons) Automotive Engineering (Full-time) - Year 2
- UEME-AKB01 : BEng (hons) Automotive Engineering (Thick Sandwich) - Year 2
- UEME-AFB16 : BEng (hons) Mechanical Engineering (Full-time) - Year 2
- UEME-AKB16 : BEng (hons) Mechanical Engineering (Thick Sandwich) - Year 2
- UEME-AFB41 : BEng (hons) Mechanical Engineering with Advanced Design and Innovation (Full-time) - Year 2
- UEME-AKB41 : BEng (hons) Mechanical Engineering with Advanced Design and Innovation (Thick Sandwich) - Year 2
- UEME-AFB38 : BEng (hons) Mechanical Engineering with Manufacturing and Management (Full-time) - Year 2
- UEME-AKB38 : BEng (hons) Mechanical Engineering with Manufacturing and Management (Thick Sandwich) - Year 2
- UEME-AFM04 : MEng (hons) Aerospace Engineering (Full-time) - Year 2
- UEME-AKM04 : MEng (hons) Aerospace Engineering (Thick Sandwich) - Year 2
- UEME-AFM05 : MEng (hons) Aerospace Engineering with French (Full-time) - Year 2
- UEME-AKM05 : MEng (hons) Aerospace Engineering with French (Thick Sandwich) - Year 2
- UEME-AFM06 : MEng (hons) Aerospace Engineering with German (Full-time) - Year 2
- UEME-AKM06 : MEng (hons) Aerospace Engineering with German (Thick Sandwich) - Year 2
- UEME-AFM01 : MEng (hons) Automotive Engineering (Full-time) - Year 2
- UEME-AKM01 : MEng (hons) Automotive Engineering (Thick Sandwich) - Year 2
- UEME-AFM02 : MEng (hons) Automotive Engineering with French (Full-time) - Year 2
- UEME-AKM02 : MEng (hons) Automotive Engineering with French (Thick Sandwich) - Year 2
- UEME-AFM03 : MEng (hons) Automotive Engineering with German (Full-time) - Year 2
- UEME-AKM03 : MEng (hons) Automotive Engineering with German (Thick Sandwich) - Year 2
- UEME-AFM16 : MEng (hons) Mechanical Engineering (Full-time) - Year 2
- UEME-AKM16 : MEng (hons) Mechanical Engineering (Thick Sandwich) - Year 2
- UEME-AFM41 : MEng (hons) Mechanical Engineering with Advanced Design and Innovation (Full-time) - Year 2
- UEME-AKM41 : MEng (hons) Mechanical Engineering with Advanced Design and Innovation (Thick Sandwich) - Year 2
- UEME-AFM42 : MEng (hons) Mechanical Engineering with Advanced Design, Innovation and French (Full-time) - Year 2
- UEME-AKM42 : MEng (hons) Mechanical Engineering with Advanced Design, Innovation and French (Thick Sandwich) - Year 2
- UEME-AFM43 : MEng (hons) Mechanical Engineering with Advanced Design, Innovation and German (Full-time) - Year 2
- UEME-AKM43 : MEng (hons) Mechanical Engineering with Advanced Design, Innovation and German (Thick Sandwich) - Year 2
- UEME-AFM17 : MEng (hons) Mechanical Engineering with French (Full-time) - Year 2
- UEME-AKM17 : MEng (hons) Mechanical Engineering with French (Thick Sandwich) - Year 2
- UEME-AFM18 : MEng (hons) Mechanical Engineering with German (Full-time) - Year 2
- UEME-AKM18 : MEng (hons) Mechanical Engineering with German (Thick Sandwich) - Year 2
- UEME-AFM38 : MEng (hons) Mechanical Engineering with Manufacturing and Management (Full-time) - Year 2
- UEME-AKM38 : MEng (hons) Mechanical Engineering with Manufacturing and Management (Thick Sandwich) - Year 2
- UEME-AFM39 : MEng (hons) Mechanical Engineering with Manufacturing, Management and French (Full-time) - Year 2
- UEME-AKM39 : MEng (hons) Mechanical Engineering with Manufacturing, Management and French (Thick Sandwich) - Year 2
- UEME-AFM40 : MEng (hons) Mechanical Engineering with Manufacturing, Management and German (Full-time) - Year 2
- UEME-AKM40 : MEng (hons) Mechanical Engineering with Manufacturing, Management and German (Thick Sandwich) - Year 2
|