Masters dissertations

MSc Civil Engineering: Innovative Structural Materials

Optimising the cost-benefit of phase change material A tool for the targeted selection of cost-efficient PCM

Xinyue Zhang, 2021

Printing imperfection - improving buckling resistance of 3D printed Steel Plated Structures.

Bishal Thapa Magar, 2021

Designing novel self-healing geopolymer composite materials

Brian Ding, 2021

The Application of Steel-Slag Concrete on Very Large Floating Structure

Fuzhen Chen, 2021

The effect of hemp fibre addition on the mechanical properties and durability of natural fibre cement composites

Zhonghao Luan, 2021

Static and dynamic-seismic response design of steel buildings

Senyao Zhou, 2021

Timber Vault

Xiaohan Mei, 2020

A comparison study of mechanical properties of natural fibre reinforced concrete

Hanmo Cui, 2020

Life Cycle Assessment of FRP reinforcement with geopolymer concrete

Chao Wen, 2020

Hydrothermal Aging of GFRP Composites

Chidchanok Loundkaewnoo, 2020

Investigation of the Pore Structure and Mechanical Performance of Hybrid Portland Cement-Lime Based Mortars

Ming Jing, 2020

Development of Self-grading Concrete

Chun Huen Kevin Yu, 2020

The durability of rammed earth

Yiyang Chen, 2020

shear test method of hemp lime

Yi Sui, 2020

Reducing the Carbon Footprint of a Concrete Structure

Edward Jones, 2020

An investigation on the energy efficiency and sustainability of phase change material (PCM) to achieve energy efficient building

Yat Yeung, 2020

Extendable timber beams for circular bio-based construction

Jack Hicks, 2020

Development of a new degradation model for FRPs

Yuxi Lu, 2020

Investigating Graphene Nanoplatelets / Graphene Oxide and Relative Dispersion Technologies for Application in Cementitious Materials

Yufan Zheng, 2020

Impact of Building Materials on Indoor Air Quality and Material Assessment under Multiple Criteria

Xing Liang, 2020

Innovative Structure for Floating Cities

Nok Huen Cyrus Chan, 2020

Simplifying sandwich panel modelling using equivalent shell element

Amir Heidarzadeh, 2019

Seismic soil-structure interation effects on a reinforced concrete frame

Baihan Wu, 2019

THE EFFECTS OF MOISTURE AND ACOUSTIC DEGRADATION ON FIBROUS PLASTER PANEL CEILINGS

Claire Barrett, 2019

Strength and Stability of Very Slender High-Strength Steel Square Hollow Sections

Ari Ahmed, 2019

Design of dowel connections in engineered bamboo

Asvin Raam Gopalakrishnan, 2019

LCA OF ALKALI-ACTIVATED SLAG MORTAR WITH ALTERNATIVE ACTIVATORS AND MINERAL ADDITIVES

Meng Gao, 2019

Waste Wash Water Recycling in Ready Mix Concrete Plants

Jiajun Gao, 2019

The Effect of Seismic Load on Steel Structures with and without bracings

Nvar Jalizada, 2019

Material for 3D printing using drones

Shan Yu, 2019

PET plastic as a partial substitution of sand, enhanced by the addition of nano silica

Francisco Castaneda Vazquez, 2019

How FRP Rebar Bond Affects the Behaviour of FRP Reinforced Concrete Beams Under Impact Loading

Douglas Blogg, 2019

CARBON FOOTPRINT RELATED TO CONCRETE STRENGTH

Xun Li, 2019

Spider Beam

Zhengyao Li, 2018

Impedance-based self-sensing concrete using embedded PZT transducers

Xiaoying Jian, 2018

The effect of different material properties on the seismic response of concrete structur

Lu Liu, 2018

Analytical modelling of landslide-induced building damage

Ned Kingdon, 2018

Investigating the effectiveness of different ceramic dowel sensors used to monitor moisture

Sahil Haque, 2018

Development of functional mortars and concretes

Jiacheng Zhang, 2018

Engineered bamboo through parametric modelling

Evangelos Tzimoulidis, 2017

Evaluation of the vibration performance of timber floors in residential buildings

Vasileios-Iraklis Lagoutaris, 2017

Mechanical strength development of pozzolanic lime mortars used in conservation

Sofia Spyrou, 2017

Compression Behavior of Small-Diameter Eccentric Roundwood Timber Elements

Benjamin David Cranston Brown, 2017

Spiderbeam Bio-material for silk reinforced concrete

Yuchen Xu, 2017

Optimisation of High Absorbent Granules as Carriers for Bacteria in Self-Healing of Concrete

Karina Karunwi, 2017

THE INVESTIGATION ABOUT THREAD LENGTH OF SELF-TAPPING SCREWS AS REINFORCEMENTS IN SPLIT TIMBER MOMENT CONNECTION

Shuo Jiang, 2017

The Use of Silicomanganese slag in lightweight alkali-activated ecological mortars

Hisham Hafez, 2017

Laminated bamboo portal frame

Zhuo Chen, 2017

Effects of thermal cycles on the structural integrity of pultruded glass fibre reinforced polymers

Xinting Xu, 2017

The effect of self-tapping screw reinforcement on moisture induced stresses in dowel-type connections

Mari Ida, 2017

The use of microcontroller kits for building performance analysis

Yassin Zabbar, 2017

Enquiries

If you have any questions, please contact us.