Department of Mechanical Engineering Programme Catalogue 2023/4
UEME-AKM38: MEng (hons) Mechanical Engineering with Manufacturing and Management
Route: MEng(Hons) Mechanical Engineering with Manufacturing and Management with Year long work placement
Leading to the award of MASTER OF ENGINEERING IN MECHANICAL ENGINEERING WITH MANUFACTURING AND MANAGEMENT
Mode of Attendance: Full-time with Thick Sandwich Placement
Normal course duration: 5 Years
[Page last updated: 23 October 2023]
This course is for students who will be in Year 2 or later in 2023/24
Applicable assessment regulations: | Undergraduate assessment regulations - https://www.bath.ac.uk/publications/undergraduate-assessment-regulations/ |
Approved exemptions: | None |
Coexistent Masters course?: | No |
DACS and exit awards: | UEME-AFM38: MEng (hons) Mechanical Engineering with Manufacturing and Management
UEME-AKL38: Diploma of Higher Education [exit award]
UEME-AKC38: Certificate of Higher Education [exit award]
Transfer to DAP possible from study years as follows: Year 1: No; Year 2: No; Year 3: Yes; Year 4: No; Year 5: Yes |
Weighting towards final award by stage: | Stage 1: 0%
Stage 2: 20%
Stage 3: 0%
Stage 4: 40%
Final Stage: 40% |
Please consult your course handbook or contact your Director of Studies for further information on assessment regulations
| This course is being replaced by a new version so Year 1 of this version is not available in 2023/24. |
Notes: - Courses and units may be changed in accordance with normal University procedures.
- This course catalogue is applicable for all years of study for the 2023/24 academic year only. Students continuing their studies into 2024/25 and beyond should not assume that this programme, or its component units, will be delivered in future years in the format displayed here.
- Assessment regulations are subject to review and update. Links given here will provide access to the latest versions of documentation. The regulations described in this documentation may not necessarily be those which applied in previous academic years. For detailed information on how assessment regulations were applied to this course in previous academic years, please contact the relevant Director of Studies.
- Availability of units is subject to constraints such as staff availability, minimum and maximum group sizes, and timetabling factors as well as a student's ability to meet any pre-requisite rules.
- Find out more about these and other important University terms and conditions here.
|
Semester 1: Stage 2
Compulsory Units:
Unit Code | Title | |
| ME20013 | Systems & control | 6 Credits |
| ME20014 | Modelling techniques 1 | 6 Credits |
| ME20016 | Solid mechanics 3 | 6 Credits |
| ME20018 | Design 3 | 6 Credits |
| ME20022 | Fluid dynamics | 6 Credits |
Semester 2: Stage 2
Compulsory Units:
Unit Code | Title | |
| ME20015 | Thermal power and heat transfer | 6 Credits |
| ME20021 | Modelling techniques 2 | 6 Credits |
| ME20023 | Solid mechanics 4 | 6 Credits |
| ME20025 | Design 4 | 6 Credits |
| ME20026 | Manufacturing operations and technology | 6 Credits |
Notes: - Courses and units may be changed in accordance with normal University procedures.
- This course catalogue is applicable for all years of study for the 2023/24 academic year only. Students continuing their studies into 2024/25 and beyond should not assume that this programme, or its component units, will be delivered in future years in the format displayed here.
- Assessment regulations are subject to review and update. Links given here will provide access to the latest versions of documentation. The regulations described in this documentation may not necessarily be those which applied in previous academic years. For detailed information on how assessment regulations were applied to this course in previous academic years, please contact the relevant Director of Studies.
- Availability of units is subject to constraints such as staff availability, minimum and maximum group sizes, and timetabling factors as well as a student's ability to meet any pre-requisite rules.
- Find out more about these and other important University terms and conditions here.
|
Academic Year: Stage 3
Compulsory Units:
Unit Code | Title | |
| ME20120 | Industrial placement | 60 Credits |
Notes: - Courses and units may be changed in accordance with normal University procedures.
- This course catalogue is applicable for all years of study for the 2023/24 academic year only. Students continuing their studies into 2024/25 and beyond should not assume that this programme, or its component units, will be delivered in future years in the format displayed here.
- Assessment regulations are subject to review and update. Links given here will provide access to the latest versions of documentation. The regulations described in this documentation may not necessarily be those which applied in previous academic years. For detailed information on how assessment regulations were applied to this course in previous academic years, please contact the relevant Director of Studies.
- Availability of units is subject to constraints such as staff availability, minimum and maximum group sizes, and timetabling factors as well as a student's ability to meet any pre-requisite rules.
- Find out more about these and other important University terms and conditions here.
|
| NB. You may be permitted to take ME40315 (External integrated project - 30 credits) instead of ME30068 and ME40228 in Semester 2, subject to the approval of your Director of Studies. |
Semester 1: Stage 4
Compulsory Units:
Unit Code | Title | |
| ME30042 | Computer integrated manufacturing | 6 Credits |
| ME30197 | Business processes | 6 Credits |
| ME30335 | Costing for engineering design and manufacture | 6 Credits |
| ME30342 | Advanced manufacturing technology | 6 Credits |
| MN20275 | Project management | 6 Credits |
Semester 2: Stage 4
Must Pass Units:
Unit Code | Title | |
| ME30068 | Group business & design project - I | 12 Credits |
| ME40228 | Group business & design project - II | 18 Credits |
Notes: - Courses and units may be changed in accordance with normal University procedures.
- This course catalogue is applicable for all years of study for the 2023/24 academic year only. Students continuing their studies into 2024/25 and beyond should not assume that this programme, or its component units, will be delivered in future years in the format displayed here.
- Assessment regulations are subject to review and update. Links given here will provide access to the latest versions of documentation. The regulations described in this documentation may not necessarily be those which applied in previous academic years. For detailed information on how assessment regulations were applied to this course in previous academic years, please contact the relevant Director of Studies.
- Availability of units is subject to constraints such as staff availability, minimum and maximum group sizes, and timetabling factors as well as a student's ability to meet any pre-requisite rules.
- Find out more about these and other important University terms and conditions here.
|
| Students must choose at least one ME4 unit as an option in Semester 1. |
Academic Year: Final Stage
Must Pass Units:
Unit Code | Title | |
| ME40321 | Engineering project | 30 Credits |
Semester 1: Final Stage
Compulsory Units:
Unit Code | Title | |
| ME40046 | Modelling and analysis of manufacturing systems | 6 Credits |
Optional Units: Select a minimum of 0 and a maximum of 1 units from the following list: BLOCK 1
Unit Code | Title | |
| ME30218 | Aircraft propulsion | 6 Credits |
| ME40212 | Biomimetics | 6 Credits |
Optional Units: Select a minimum of 0 and a maximum of 1 units from the following list: BLOCK 2
Unit Code | Title | |
| ME30030 | Structural mechanics | 6 Credits |
| ME30045 | Aerospace structures 1 | 6 Credits |
| ME40058 | Fluid power | 6 Credits |
Optional Units: Select a minimum of 0 and a maximum of 1 units from the following list: BLOCK 3
Unit Code | Title | |
| ME30029 | Control systems | 6 Credits |
| MN20072 | Managing human resources | 6 Credits |
Optional Units: Select a minimum of 0 and a maximum of 1 units from the following list: BLOCK 5
Unit Code | Title | |
| ME30067 | Vehicle dynamics | 6 Credits |
| ME40054 | Computational fluid dynamics | 6 Credits |
| ME40061 | Biomechanics | 6 Credits |
Optional Units: Select a minimum of 0 and a maximum of 1 units from the following list: BLOCK 6
Unit Code | Title | |
| ME30219 | Aircraft performance | 6 Credits |
| ME40064 | System modelling & simulation | 6 Credits |
Optional Units: Select a minimum of 0 and a maximum of 1 units from the following list: BLOCK 7
Unit Code | Title | |
| ME30041 | Aircraft stability & control | 6 Credits |
| ME30217 | Vehicle engineering | 6 Credits |
| ME40331 | Robotics engineering | 6 Credits |
Optional Units: Select a minimum of 0 and a maximum of 1 units from the following list: BLOCK 8
Unit Code | Title | |
| ME30032 | Aerodynamics | 6 Credits |
| ME30037 | Internal combustion engine technology | 6 Credits |
| ME30264 | Materials selection in engineering design | 6 Credits |
Optional Units: Select a minimum of 0 and a maximum of 1 units from the following list: BLOCK 9
Unit Code | Title | |
| ME30060 | Heat transfer | 6 Credits |
| ME40055 | Energy & the environment | 6 Credits |
| ME40195 | Medical engineering | 6 Credits |
Optional Units: Select a minimum of 0 and a maximum of 1 units from the following list: BLOCK 10
Unit Code | Title | |
| ME30294 | Product design and development | 6 Credits |
| MN20074 | Digital business innovation | 6 Credits |
Notes: - Courses and units may be changed in accordance with normal University procedures.
- This course catalogue is applicable for all years of study for the 2023/24 academic year only. Students continuing their studies into 2024/25 and beyond should not assume that this programme, or its component units, will be delivered in future years in the format displayed here.
- Assessment regulations are subject to review and update. Links given here will provide access to the latest versions of documentation. The regulations described in this documentation may not necessarily be those which applied in previous academic years. For detailed information on how assessment regulations were applied to this course in previous academic years, please contact the relevant Director of Studies.
- Availability of units is subject to constraints such as staff availability, minimum and maximum group sizes, and timetabling factors as well as a student's ability to meet any pre-requisite rules.
- Find out more about these and other important University terms and conditions here.
|
